Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Westi on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. tomaldworth

    CICS 4.1 Inbound calls to Line 2 seize Lines 1 & 2

    I should have mentioned that I moved line 2 to the line 4 port and it works just fine...
  2. tomaldworth

    CICS 4.1 Inbound calls to Line 2 seize Lines 1 & 2

    I have a problem with a CICS 4.1 that has me scratching my head, maybe you guys can help. When a call comes in to the system on Line 2 I get a half ring and both lines 1 and 2 show as in use and cannot be answered. The caller hears a telco message saying the call cannot be completed and they...
  3. tomaldworth

    BCM 450 R1 routing to target lines

    ***FIXED*** Installing latest updates did not correct the issue so I spoke with Nortel tech support and found out that my problems were being caused by installing the 2 DTMs in slots 1 and 2 in the main cabinet. I was told that the DTM set to Primary clocking must be installed in slot 4, with...
  4. tomaldworth

    BCM 450 R1 routing to target lines

    Thank you for the feedback, In terms of line numbering I have them set as follows: Lines 1-8 reserved for VOIP PRI #1 Lines 9-31 (primary) PRI #2 Lines 32-54 (secondary) I have changed the sequencing so that all incomimg calls start on Line 9 and work their way up and all outgoing start with...
  5. tomaldworth

    BCM 450 R1 routing to target lines

    Hello All- I am in the process of installing a BCM 450 with 2 PRI and I am having trouble getting inbound calls to route to target lines. For example I have set up DN 221 with target line 361 to appear and ring. I have configured target line 361 with the public received digits of "1234" and...

Part and Inventory Search

Back
Top