Search results for query: *

I have another networking question, hopefully this one is easy. I have two Magix switches networked toghether. The one I have set as Legend NTW will not let me assign an operator. My problem with this is that I cannot assign true line appearance. Is there anything I can do. I am also unable...

Here is the latest update. I could not find any errors in programming, or a problem with the t-1 cross-over cable. I moved my cards an reprogrammed everything. Everything is now working properly. Thanks to everybody who took time to give feedback. I appreciate it.

Here is the latest. I went through programming over and over and could not find a problem. I changed my T-1 cross-over and it still did not work. I completely re-programmed everything, and it worked perfectly. Thanks to everbody who took the time to give input. I appreciate it.

My clock source on the main switch is set to slot 13 (100dcd card) internal, and my clock source on the remote switch is set to slot 4 (100dcd card) loop. There on no other T-1's or PRI's on either switch other than the point to point.

Here is my situation. I have two Magix switches. Both switches have 100dcd cards in them. I have set both cards as PRI and done what I believe to be all of the required programming. Both switches are pri-esf-b8zs. PRI switch types are Legend PBX for main site and Legend NTW for remote...

Can somebody please tell me what the pinouts are for the 100dcd t1/pri card? Do you need a 25 pair amphenol or is the network jack the xmit and receive interface? Thanks

I unplugged all devices at ksu (analog c.o. lines, digital phones, and slt devices). With just my buttset plugged into one port I still have static as soon as I go off hook to get intercom dial tone. Do these cards possibly have a heat problem like old partner cards that causes static. At...

Both cabinets are grounded at the power supply. I have tried resetting all cards in maint., as well as physically removing and reseating them. The system has been in place and operating for approx. six years with now environment changes.

The static is on intercom dial tone on all single line ports (intermittent on some ports). This is with me going off hook with my buttset at ksu. Static seemed to start in the second cabinet, but now is slowing showing up system wide. I removed all physical station and trunk connections...

I have a Merlin Magix with static occuring on all single line ports. I have two cabinets with a total of 6 analog cards. All cards have static in both cabinets. Any Ideas?