Search results for query: *

Hi, Try to change the settings in your client under Tools / Options / Status, to see if the behavior changes. Also, this might help you: http://www.shudnow.net/2011/02/07/lync-2010-enhanced-privacy-controls/ /mk

Also, check your CT adapter - i do not think you can go on / off duty without it connected and working. /mk

Hi, I have tried it - works great. Probably certified soon as well. The command looks good, but I would rather change the port in the Lync topology builder and use 5060. /mk

Maybe this one? sip_route -trusted Is the remote end within a domain that uses p-asserted ids. Values are yes/no, default=no. /mk

This might help: http://support.microsoft.com/kb/938286 /mk

Hello, What is the revisions of your CTI adapters? I think older revisions had problems with lost signals. I am not sure what the latest revison is right now, but I think I remember seeing R7A atleast. /mk

Hello, Microsoft talks about integration with OCS in three areas: Direct SIP Dual Forking RCC It is possible (or will be possible) to integrate MX-ONE in all these ways for MD110 it will probably be somewhat limited. Direct SIP / SIP Trunk It is possible to setup a SIP trunk toward a...

Hi, There is a known problem with OWS Supervisor and XP. You need to open TCP port 135 and other things. There is a Service Advice published about this: EUS-04:008118 Uen Introduction With the Windows XP SP2 some higher security patches have been added to the operating system. This will...

Hi, Application Link 4.0 Service Pack 18 is now released, and it also comes as a new media kit with the number LZY 203 183/1 R1A. /mk

Hi, CCM / CCA was phased out, but not Application Link. It should be possible to obtain it still. Service Pack 17 was released in May and a Service Pack 18 is planned. /mk

Hi, There is no separate "MD110 ApplicationLink 4.0 Media Kit". The media kit you are looking for is called MD110 Call center & Application Link (LZY 601 218) It contains CCM / CCA / Application Link. /mk

Hi, You also need to configure EMG to connect to the MD110 and create the SYSTEM user: --- Configuration for Personal Number access The Personal Number feature is supported via backend Extension Manager to send MML command to the appropriate PBX. The backend EMG runs under a fixed D.N.A. user...

Hi, Not sure if I am in the correct forum but... If an application is designed and tested to work on an hyper threading system, does that mean that the application automatically will work on dual processor systems as well? I.e. Is there a difference between hyper threading and dual processors...

Or if you do not have the web interface goto \Program Files\Ericsson\License Manager and type InstallLicenses <filename>, where <filename> is a fully qualified path to the license file to be installed.

Is there a way I can run both IE 6.0 and 7.0 on the same PC at the same time? (or atleast have them both installed and run them one at the time)

Hi, I have tested this feature on the MX-ONE Telephony Switch (BC13). You do need a license: ANALOGUE-EXTENSION-CLIP FAL1046191 100 0 I am not a 100% sure but I guess it is only working with the new ELU34. No problems so far... /mk

Hi, I have successfully used Mobile Gateway 3.0 from Realwow (www.realwow.com) for this. I know there was a fix related to this in DNA 5.2 SP4 so make sure you are using at least that version of DNA. /mk

Hi Guys, Here are the commands I am using: IOEQI:EQU=1-0-60-4,USAGE=OUT,TYPE=NETWORK,IODEV=NIU1LAN; IONCI:IODEV=NIU1LAN,USER=GICI-1,RPORT=800,IP=100.100.100.10; ICFUI:IFCIND=1,IODEV=NIU1LAN,USER=GICI-1,DFMT=5,UPDFCN=YES,FILLER=64; ISFUI:IFCIND=1,TEFMT=2,TIFMT=2,DTERM=00; There really is...

Hi, I would be very careful turing off this service. At one site we have experienced the database repopulation (RDS Schedule 2) taking almost 2 hours to complete with ClockSynch off compared to around 15 minutes after we turned it on. It seems as RDS still needs the Ericsson Clocksynch service...

Hi, That should most likely not be a problem. The ammount of data sent to the phones is quite small. I have done this when it comes to DNA / ECA / ECC servers and it works even though they are using IIS as well. /mk