Search results for query: *

look at both the sets class of service and the SIP trunks class of service... note too that they should be using separate Classes of Service. when in the COS form, you can click the "?" for help. BTW, it's time to upgrade from 8 as it's no longer supported. phone set's should have these...

It seems that something in your network topology has changed - misconfigured switches - LLDP, STP, or CDP settings are changing. Each time it does, your phones may show this. Spanning tree IMO is the culprit. The switch closest to the Firewall should be spanning tree priority 0. All others...

What is it that you're trying to show in the video? I see that you have a password/options conflict - meaning that the options that are selected don't match those on the MOSS sheet associated with the System Identity Code and the password. I've never seen the Mitel Options Password cycle...

in the system administration tool go to Users and Devices, Advanced Configuration, Phone Applications Update. When you're in this form, click the large ? at the top of the screen and it should show you the help docs. Branding-6930.png - you'll need to play with the file size to get it to...

Depends on what you mean by IVR. In the truest sense, an IVR is Interactive Voice Response - like calling in and having voice recognition. I've found over the years that a lot of folks coming into the voice world consider an Auto Attendant (press 1 for this, 2 for that) an IVR. That said, on...

I agree with Biliz66 - almost always 1-way or no-audio issues are a routing issue. I recently had a site that replaced their DHCP server and the folks didn't set the voice network option 3 for Default Gateway. As phones renewed their lease, they removed the default gateway causing 1-way audio...

was that the settings or is that what you changed it to to correct it? If that was the original settings and the problem persists, check the following: in form 19, the dial zero point might need to be looked at. Call in and log into mailbox zero - check to see if there is a recorded name for...

I would think then that the operator mailbox "0" is set up and has a recorded name from the GM. Look at the mailbox in form 50 to see if its extension is set to the GM's extension.

nope. Looks pretty random. Mitel does the same thing.

using putty - log into the system using RAW port 2002. -> master_list (0x1) this will give you a full list of all mailboxes with all of their data including their one-touch options. When you get that info, it should point you in the right direction. Also, monitor the SMDR output while testing...

Some browsers, when you edit a form that contains a username and password that you have saved, it will auto-fill those fields. Clear out the saved password to the system and try again. Some things that might also be helpful: 3300/MCD/MiVB software version - the fact that it is an AX controller...

In the SIP Peer Profile under SDP Options, Check the RTP Packetization Rate. If you're using older Mitel telephones, you may have to adjust the rate to accommodate it. default is 20ms I had to make a change at one site to accommodate the older phones and/or AT&T SIP trunks. I believe AT&T...

Mitel support suggested adding additional messages in the one Marquee. 1. right click on the marquee, and configure it. 2. click add a message - give it a name - "marquee 2" (name is not displayed anywhere). 3. add the variables as needed - replicate what they want for the new users. 4. click...

How long has the system been running? I would restart the system and see if that resolves the issue. If restarting the system isn't an option, you can issue the commands to stop and start the voicemail (I'm assuming that this is the Embedded Voicemail). If the system is running MiVB 8.x and...

The 5235's and Navigator both quit working many versions ago. We were able to get the 5235 working, but as you indicated, the screen never populated. Since I only had one of these at our office with no other customers with them, we simply replaced the phone with a newer 53xx phone. The...

On Mitel systems, you add a "P" for each pause. From a quick search, the Avaya IP Office uses a "P" as well...

Log into miaccess.mitel.com go to the compatibility matrix on the left-side menu. Step 1 - Select Applications Step 2 - select MiContact Center Business (MiCC-B). to the right of that you can select the release version of MiCC-B, or skip over it and select Compatible with - select platforms...

thanks Chriss! I had been trying to log into this since yesterday afternoon. Requesting a password reset was never received. I saw your post saying that the pw is only the 1st 10 characters of the password. Since mine was at 11, I removed the last and it let me in. I guess I'll update my...

I have a customer that recently added another ACD agent, but unable to add to them to the marquee due to limited text space. I have opened a ticket with Mitel support and they said that it is a limit and suggested that we add an entry to the Mitel Voice. Apparently the MiCC design team won't...

I have two sites that are using the Marwatch legacy probe. Neither of these are polling traffic reports from the system. When I review the settings for the MiVB on Marwatch and save it, it shows that it can't log into the system with the MiXML error: "ExecutionException...