Search results for query: *

Hello All, (posting this in both Mitel and Siemens groups just in case) Has anyone attempted to connect Openscape Business with Mitel MiVoice office 400 over VPN? I am sure there is no official support for this, but it must be possible with a SIP trunk? (not looking to re-invent the wheel if...

Hello All, (posting this in both Mitel and Siemens groups just in case) Has anyone attempted to connect Mitel MiVoice office 400 with Openscape Business over VPN? I am sure there is no official support for this, but it must be possible with a SIP trunk? (not looking to re-invent the wheel if...

I have a feeling that if I was on a MS DHCP it would work, but I am stuck with the Sophos UTM. We ended up manually entering the DLS server after the phones grabbed the new IP and vlan from the option 43.

Me again, We have tried to get option 43 to work for the phones following exactly the settings from the OSB admin documentation. We know the phone is seeing the option because they are grabbing the right IP segment and setting the vlan correctly; it is the address for the DLS server that is...

We are investigating other options for SIP client on cell phones (iPhone) in place of MyPortal which is proving problematic on our network. Does anyone have experience or suggestions on a stable SIP client for OSB. We are currently testing media5-fone but it looks like the product is going EOL...

All ours are iPhone 5s. My gut tells me it is a no-connect issue to the APNS but the connection appears to be ok.

Deploying the MyPortal to go on iPhones that will be used as internal wifi phones. When installed on iPhone an incoming call only rings once and if the application is in background an incoming call will not ring or wake the phone. Works perfectly on Android. software version V2R4.0.1_007

We ended up doing a re-import of all the stations at it worked first try. There must have been some issue on the first import. Now we have an issue with MyPortal to go and iPhone... new thread time.

GWA1 (Vendor)(OP)8 Jun 18 01:46 Hello all, I need to manipulate (drop) digits sent by the carrier to match internal extension for DID. Pretty easy on Cisco and Avaya, but I can't find where they do it on OSB. (looked though the Web admin and Manager E).

Hello all, I need to manipulate (drop) digits sent by the carrier to match internal extension for DID. Pretty easy on Cisco and Avaya, but I can't find where they do it on OSB. (looked though the Web admin and Manager E).

I am trying to re-initialize a DMC080 on a CICS 7.0. I have reset the password to default as instructions state from the CLI over serial. I have the admin software, and have tried a USB nul modem and regular nul modem cable (both will show DCM connected). The problem I have is the password is...

has anybody else seen this and found a solution? (I have tried changeing the server time to GMT as some support items suggest but with no luck). When installing presentation server 4 on Win2003R2 server I get this. sitemgr.exe has generated errors process id=0xeb4, thread id 0xc4c (3148)

Thanks everyone... I will scavenge a second card and get those lines up.

Crap... so each card on these systems is only good for 4 trunks? It is not possible that the one card in there can handle the 8 lines?

There is only one trunk card in system. Do the second group of 4 lines need to be enabled or are they active by default?

If a 8x16 was purchased (verified with invoice) wouldn't that mean that the system is not restricted? (although it would not be the first time a supplier shipped the wrong item).

I have a CICS 8x16 7.0 were the first 4 lines are working fine. we added 3 new lines (31, 32, 33) and configured to ring/app on the phones, but when we punch the button there is a delay then service not available on the display and a fast busy. The new lines have been tested by replacing one...

Not sure if this is the right forum for this question. I have an access databas that looks like it was created with access 2000 running on access 2007 (lists 2000 mode at top of screen). When we use the database on the machine where the database files are stored the system will run fine. When...

I have a Nortel/Polycom NTAB2666 that has been setup as per documentation to a CICS, that will not dial to outside numbers. when any other number than 2 (inside DN) or 9 is pressed I get a fast busy. I am sure I am missing something simple here.