Search results for query: *

OK so if LD 95 info is not passable to the outside, is it the CLID entry for each number that allows for the info to be sent out? If this is the case, would the CLID need to be changed for every single DN that we use?

Hello again! I have been scratching my head on figuring out how to make the Nortel Option 81c Pass Caller ID information to the outside world. I contacted Tel-co and they said we do have the option to allow it, however, I am a little lost on where to set this up at. Currently, just the...

Firebird, Will the Option 11c Shutdown during a end-of-day routine if the temperature is consistently above 45 C? Im sure that with the temp. at or above acceptable conditions will shorten the life of the equipment.

Here is another question for you all! I have a Nortel Option 11c Version 3 where the power supply breaker/switch shuts off daily. We had this problem last year around the same time frame, replaced the power supply and had no problems after that. Now the issue has come back. Could this be...

Concluding on this issue it was the Fiber Daughter board that was bad. During Spring Break I finally had a chance to work on the system. I started by replacing the SSC card in the Main Cabinet. This did not resolve the issue because I was still getting the ERR5098 codes. I then moved to...

OK! here is one for you all... I received an e-mail tonight (from our department supervisor) requesting a call trace to be conducted on a number that is unknown... by this I mean that the inbound calling number was received by one receptionist, not logged manually, transferred to another...

Hello again! I am having issues retrieving or building call trees in the application builder. I do have application builder installed on my PC, I can log into the Call Pilot server via the web interface, get to the app builder main screen via call pilot home page, click open and see the...

well here is the deal on that. The trunk card is set up to allow the internal users on the campus to access our intercom machine that is also located on that campus. It is also set for 911 dialing so a 911 cal would be located to the campus facility and not where our option 81 resides. All in...

I have an option 11c that is having Universal Trunk Card issues. The errors I am seeing is a "TRK0151 Seizure failure" and the other is a "TRK0156 Trunk release failure on outgoing CO trunk. Disconnect Supervision Timer (DSI) was exceeded." Any ideas on what could be causing these? Option 11...

Is there a way to do a self test on these cards to check them out to see if they are experiencing problems?

I was wondering if any one knew how to set up a modem so I can hyperterminal into remote option 11c's. We are running release 3 if that makes a difference.

any clue on what these error codes could be? maybe some examples?

wouldnt that cause issues with the other cards as well though?

yes it is, cabinet three to be exact..

I have already changed the card. Brand new right out the box...

good morning! I have been experiencing some issues with our trunk card in the Option 11c arbitrarily disabling itself. Not sure if this has anything to do with it but I do see frequent ERR 5098 codes popping up any suggestions?

Basically our original config was like this: PDCH 54 type msdl ... ... ISDF d100 ... PRI Interface ID 84 0 109 0 108 0 116 0 117 0 106 0 BDCH 55 PDCH 54 Type MSDL ... ... ... ISDF d100 Loop Info: 87 ch 1 idle ... ch 23 idle ch 24 DCH 54 121 ch 1 idle ... ch 23 idle ch 24 DCH 55 84 - 117...

yeah were scratching our heads on this one as well...

Last night was a long night with telco. We were trying to change our signalling on the Nortel Option 81 switch from DMS 100 to NI2. We are using 8 T-1 PRI circuits to talk to CO. Everything was going great until we hit a snag on rebuilding the loops. Apparently only two of our loops were set...

There are no TTY's to out. its like everything is lost and it wont let me rebuild anything for the elans