Search results for query: *

I had the same issue on a windows 03 server running vmpro 7.0.23 using distributed voicemail. The log showed the following: 11/04/2012 00:30:37.437 - Attempting to connect to host example.org on port 25, local bound address is (null) 11/04/2012 00:30:37.437 - CSMTPConnection::Connect: Could not...

SS Pass through the Calling Party Number. For example, to provide the incoming ICLID at the far end of a VoIP connection, a short code ? with telephone number .SS should be added to the IP line. i Both the S and SS characters can be followed by an i, that is Si and SSi. Doing this sets the...

Make sure your working dir is set to the manager folder, "C:\program files\Avaya\IP Office\Manager". It's probably unable to find the files to update the phones through the TFTP server, or it may just be a TFTP issue. Check that your TFTP address is set correctly in the system tab.

Try putting your dial out code as a prefix for the lines

Does the user that your forwarding have a physical phone or is it a phantom\hotdesk user? I had it happen to me on phantom\hotdesk users, but deleting and then re-adding the ext back resolved it for me so far.

Are you just using the One X phones to try to dial out, or are you connecting it to an IP Office through an analog ext. port?

Copy and paste the main ARS, rename it "Remote" In all of the short codes, or the short code of you choosing, put ".SS" at the end of the telephone number. So if you have a code of "1N;" set the telephone number to be "1N.SS" with a feature of dial 3k1. Build a seperate dial out code, in system...

I stand corrected..... 2T+4A (3 VoIP)* 4T+8A (3 VoIP)* 4T+4A+8DS (3 VoIP) 4T+4A+8DS (16 VoIP) *These models are still supported but are no longer available from Avaya. Previous models that included integral DT ports are not supported on IP Office 3.0 or...

As far as I knew, the 8a SOHO was not supported in 4.0

It will also transfer you if your vm hunt group members are not all in the hunt group. What VM do you have?

del 2??? from the main menu, have 2 go to a sub menu with ??? and timeout in one sec to go to the original 2 selector code destination.

It sounds like you have an assisted transfer, use a direct transfer instead..... assuming that it works on your version!

I need to get 2 messages from a r6 Partner Messaging and convert them into .wav files. Is there any way to accomplish this without using the unified messaging?

Was the greeting activated for outside calls & inside calls? Are you testing both?

The only time I have had a 406 reboot from VCM is when I put an old 403 (5chan) one into a 406v2. I'm not sure if that helps or not.