Search results for query: *

Hi, I am trying the understand what is the use of the command "mls qos vlan-based". Let's say I have the following configured: interface Gi7/4 switchport switchport access vlan 156 switchport mode access no shut ! interface Gi7/5 switchport switchport access vlan 157 switchport mode...

Hi, I wanted to know if there was any difference in using either logging event-link status command vs the snmp trap link-status command? Thank you, Victor

Thank you all for your help but I figured it out.

Sorry about. Below is what is being match on ACL 101. R1 - access-list 101 permit tcp 1.1.1.0 0.0.0.255 2.2.2.0 0.0.0.255 eq 1944 R2 - access-list 101 permit tcp 2.2.2.0 0.0.0.255 1.1.1.0 0.0.0.255 eq 1944

I having been trying to establish an ipsec tunnel between the two router below but I have been unsuccessful. Below are the configurations for both routers. What am I missing? Thank you R1 Config crypto isakmp policy 5 encr aes authentication pre-share group 5 crypto isakmp key grace...

Well I am looking for is to be able to export a terminal window from the linux into windows using something like putty. Does anyone have any recommendations? Thanks

Hi, I wanted to know how I can export a Linux display into windows? Thank you

Hi, I am bit confused on the terminology and the design of AIX. What is the difference between AIX and the kernel? Are they both the same entity or are they both looked upon as two OS? Such as the kernel not being a full-blown version of UNIX. Thank you, Victor

How can I setup via the Finder window a default program that will open a specific file always. From example all .txt file should always open with the application "Textedit". Thank You

Hi, I was practing the following configs on the lab below. However, I am not sure how the ip nat outside source static x.x.x.x x.x.x.x works. I know that the ip nat inside source list 20 pool NAT-Pool overload command is used to nat the sources which matched against ACL 20. ip nat...

Alright, I understand what you mean I have to do. However, can you help me out with the configuration to accomplish this? Thank You

I removed a lot of things from the PIX config, which I believed were not necessary to fix this issue. Also, the PIX firewall is not setup to NAT. It does not have any global pools defined. All the ip address that you see in PIX config are the real ip address of the devices. Even though I am...

I have a PIX firewall which has three interfaces. Of the DMZ interface there is a workstation with an IP address of 143.104.182.37 which is trying to access a server located on the inside interface with an IP address of 143.104.183.198. I checked the firewall log and I get the follow output...

I already got the tunnel up and running. Thank you

I have a site -to- site VPN setup with a remote site, using the real address of the each others network. The problem is that now I have to nat the users out the outside interface of the ASA for the ASA site to the PIX side. Also, there are four devices located behind the PIX using private...

Yes a lot of things are working on the ASA. The router is not doing NAT the ASA is doing NAT. It might look confusing because I removed a few things that I could not post. I got the VPN tunnel up however I still have an issue. If a host located on the PIX side(10.1.1.0) try to telnet into a...

Ok I configured both sides with the site to site VPN configuration but the tunnel is not coming up what am I doing wrong? Below is the config for the ASA and the PIX. Thank you ASA Config ASA Version 7.2(2) ! hostname ASA1 domain-name xxxxxx enable password xxxxxxxxx encrypted names ...

I have a VPN Concentrator, and I have a large amount of users defined on the vpn concentrator database. I wanted to know how I can limit an individual user from only reach a server that they need access too.

I am trying to setup a site to site VPN between an ASA and a PIX firewall. I need help with the entire config? Also I am a little confused on what IP address should I be using on PIX side for the peer address. Should it be the G0/0 ip address on the W_Net_1 Router or should it be ip address of...

What you need is this: route 0.0.0.0 0.0.0.0 "outside_Interface_IP_address" 1