Search results for query: *

So nobody has an idea were the problem might in?

Hi, A client of ours has a (Lync to Sip gateway to IP Office) setup without a problem on several IP Offices in their SCN. This setup is working fine on several of their IPO system. But on one particular system in Brasil they are having trouble dialing an outside number from Lynch to the IP...

Hi, I'm having issue with my sonicwall Sonicwall TZ 100 that it will stop responding at times. When the sonicwall is unresponsive there is no internet, DHCP server on the sonicwall stops, and I can't access the sonicwall management portal. The only way to get it back up is to unplug the power...

Hi, I'm having trouble connecting my 9630 and 5610 SWIP to the IPSEC VPN. It passes phase 1 without a problem but it fails on phase 2. The 5610 SW IP phone says phase 2 proposal mismatch. The watchguard and the phone are both set the same with phase 2. they both have type ESP, Authentication is...

Thank You again intrigrant. Your link got me closer in configuring this device for the IP Office. I still ran into trouble not registering with the IP Office so I submitted a ticket to Patton and they helped me in programming it. So now it is working with the IP office. So here is the config...

Thank you for the link intrigrant. Now some new question arise in which I could be right or wrong. On every single "<IP or Domain>" I'm thinking will put the IP Office IP address. Now what confused me is the part "route <Phonenumber Port 0 0> dest-interface IF_FXS_00". On the "<Phonenumber...

Hi, Has anybody configure the "SmartNode 4112 Voip Media Gateway" with IP Office SIP endpoint? I have configure the "SmartLink M-ATA" with IP Office without any problem. But this Voip Media gateway confuses the heck out of me. I have successfully connected to the web interface and the console...

Hi, I'm not sure if I'm posting this on the right forum but here it is. I have a HP Procurve 2610-24-PWR (J9087A). When we do file transfer from computer to computer via workgroups the file transfer is limited to 512K transfer rate. On our old office we had a couple of unmanaged switches and...

Ahh. Thank You. It's working now. I apologize for misunderstanding your first port.

Do I uncheck this on sip users only?

Here a bit more on the monitor log. 151592369mS SIP Rx: UDP 192.168.11.114:3072 -> 192.168.11.10:5060 REFER sip:601@192.168.11.10:5060;transport=udp SIP/2.0 Via: SIP/2.0/UDP 192.168.11.114:3072;branch=z9hG4bK-3t6a5fggcplr;rport From...

Hi, I have two sip phones connected to IP Office. A Yealink VP530(extn604) and a Snom 821(extn603). When I try transfer a call I get transferred failed through theses sip phones. I'm trying to transfers to extension 604. Here is part of the error I'm getting in monitor. 151592374mS SIP Call...

Hi, I'm having an issue with a Remote H323 Extension. I have all ports on the Sonicwall open according to the IP office manager. The phone boots up and I put the public IP address. The phone boots up and it ask for extension. After I enter extension the phone start saying Registering then it...

Hi, I'm playing with SipXecs in my lab office and I can't manage to Dial an IP Office extension from SipX. I could dial a SipX extension from IP Office but not the other way around. I know there a problem with my configuration. I never played with SIPx before so it's my first. I looked at the...

Here is the monitor error log if that will also help. 1298871mS H323Evt: Recv: RegistrationRequest 192.168.1.123; Endpoints registered: 17; Endpoints in registration: 0 1299891mS H323Evt: Recv: RegistrationRequest 192.168.1.122; Endpoints registered: 17; Endpoints in...

Hi, Hi I have earthlink sip trunk. The sip configuration that I had before use to work. Now the sip trunk stop working and I get an error that I posted below. I try changing small bit of configuration but I still nothing. Then I switch to how it was working and nothing. I called Earthlink and...

Hi, I have a customer that called telling me that voicemail is not working. They have 13 System connected through SCN using the latest 8.0 version. They are using centralize voicemail. I checked voicemail pro client and the user mailbox for the Guatemala system were disable. Now my question...

Ahh. I figure it out now. I missed the user rights on the user part. I had to scroll all the way down. Thank You Benjamin

How would I do this? Sorry I haven't done this yet.

Is time profile for users is possible? This the Scenario I'm in. The customer request below: " Phone Ext. 5200 Ring Schedule needs to be set to - Saturday - 8:30 – 4:00pm - Sunday No rings Just Voicemail " I know this could be done with a Huntgroup and DIDs, but not sure with users...