Search results for query: *

Not on site anymore now, but I just rang the operator, she tried that, she reckons it just parked my call (in the bottom left screen). As I say, not on site at the moment, so can't be 100% on that test result.

Either, call comes in: Click on it & drag and drop onto group or, Hits Enter, dials group number and F2's it.

yes, it did. We're on the support advised upgrade path to try to resolve other funnies with SC. Hoped it wouldn't create more!

hmmmn, good point, badly worded. we tested: 1) Using a ddi to an agent (5410 handset)and trasfered to a CCR group, worked OK. 2) Took the SC offline and used the operators handset(5410)to answer a main group call & transfer to a CCR group, worked OK Both are CCR agents with licences. 3) SC on...

Hello, Sorry to trouble the collective with this odd one, hope it's not something stupid I've done this time! Just upgraded to IPO 8.1.81, SC4.2.35, CCR 8.1.41.1, Server 2008R2. (would go to 9, but customer can't spend the money) All seemed to go suspiciously well... but, If the SoftConsole...

Totally agree, popping a new unit in would be the simpler solution... if it weren't for the bean counters.. & they would never, ever get the paperwork sorted to buy from eBay.. But, when it takes 48 hours now to get a flipping unit to site, once it's been authorised that is, from wherever the...

thread940-1646782 Hi, I know this is an old thread I'm referencing, but I have an ongoing problem with the power supplies for the IP500. We have a base of aging V1 IP500's and I'm getting a fair number of blown power supplies, which, OK would be a pain, but manageble if I could get spares...

hmmmn, stuck the NoUser sournce number bit in yesterday, monitoring today. I have my doubts about it though... I reckon it will just push up the volume of the conference for all the calls, good and bad, not just adjust the bad.

Thanks gents, Hi Ho, it's off to work I go.

Hi guys, Thanks for the replies.. The phones are all on the same LAN, very small network really, two HP Procurve switches and using the dual port on the phone for PC's. Voice and data split on seperate VLAN's. Volume drops off as more calls get recorded, doesn't waver, just gets quieter the...

Hi, This is a bit of an odd one. It's taken us a while to work out the situation. It's an IP500 V2 6.1.12, all VOIP phones 1600 series. The trunks are ISDN 30's (x2). G711 now being used, but was the same on G729. When we use the VM pro to record incoming external calls, we get a drop in...

Absolutely, completley agree. This is what I've been telling them, it's all ISDN, but the non geo guys are bamboozling the customer with so much horse poo, I'm beginning to doubt myself. I just want to be sure I've read the disconnect part of the trace right so I'm 100% sure and can tell them...

Hi, Hopefully this wil be an easy one! It's an old 2.1.31 IP412 (DT handsets), so no support from Avaya. Incoming calls via non geographic numbers ring for a minute, then cut off. Doesn't matter if you point the calls at a group or individual extn, always cut off. If you ring the underlying...

Hi, It's been a while since I worked on IPO so be nice (please)! Anyway, I have an IP Office (5.0.26) with CCC (delta server 5.2.36) with wallboards that intermittently lose connection (connection lost message)every couple of days. It's 3 WB's, but they don't all go at once. When you try to...

Hi, Please excuse the daft question (and I suspect there may be more...)but I've recently been tasked with looking after a lot of Panasonic product after years of Avaya gear. Anyway, I've had a question from a client asking if there any method of logging "chat" messages performed on the Phone...

Hi, Thanks for the replies, In the Wireshark traces I can see the DECT extension numbers coming through so I reckon it's trying to register as SIP extensions. Having anoher go today, I'll see how it goes. Thanks.

Hi, bit of a long shot, just wondered if someone had tried this. I'm trying to connect the NEC SIP DECT (SV8100 DECT Access Point AP300S)to an Panasonic NCP 500. Yep, a bit mad, but we had some spares from stores and if it works would make a nice cost effective solution. I've registered a...

Hi, Has anybody used Siemens consumer DECT handsets on the business DECT system?? I've logged a few SL375 consumer handsets, which look identical to the S3 professional, onto our HiPath 3000 very successfully and can't find any differences between the S3 professional functions or build quality...

Hi, hope this isn't too daft a question.. but, is it possible to program individual line appearance next to the keys on a 9640 SIP (or any 96XX SIP) phone and give busy/free status?? Thanks!

I know this is really going to be a dumb question, but anyway.. I'm trying to get an Openstage 60 (SIP)phone working on our Siemens HIPath OpenOffice. It's running DHCP and the normal IP(HFA)version phone works fine, I'm just getting errors RS2 and RG2 which are the "no server and no registra...