Search results for query: *

Dears, I setup pix 515E behind the internet router. Do you know effictive way to prevent video streaming over internet traffic.

there is no any access-list at all. but i want to add that when i write "debug icmp trace" in the pix firewall the following replay appear: ********************************************************** 4034: ICMP echo-request: translating inside:192.168.1.4 to outside:196.219.50.166 4035: ICMP...

thnx for your replay i can reach the router successfully and i can browse the internet wich mean tha the natting in the router and pix is successfully done. but when i'm trying to ping public ip that is natting to private server it doesn't work . I wonder why alghouth i make the following...

Dears, I want to secure my network using cisco pix 515E by putting the pix between my internet router and my switch. I want to enable some servers to be accessed from out side.. I upload this configuration in my pix: access-list acl_out permit tcp any host 196.219.50.164 eq www access-list...

thanx for your replay, but what i mean is by "Login" key. you can see the reference which i mean by looking the forward: http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeblock.html#wp1021929

Dears , I made call blocking pattern to unlock international call in my organization and i want to exempt this blocking based on login key. actually the exempted phones can make international call before login into the phones using pin numbers. how can i prevent the unlogin people to dial...

Dears, I have a task to establish voice VPN between two different sites using cisco callmanager express 2851 (CME 4.1). one is located at cairo and the other in Dubai. I want to establish one number in cairo and when any one call this number will divert the call to specific number on the other...

when i make the following command: MohCallManager(config)#application MohCallManager(config-app)#service nileone MohCallManager(config-app-param)#param number-of-hunt-grps 4 Warning: parameter number-of-hunt-grps has not been registered under namespace. why is this warning message appear and...

Dears, I'm working at cisco callmanager express "" and try to make AA services. When i try to make the commands which explained in the cisoc documentation i found the following error: "MohCallManager(config-app-param)#param aa-hunt1 1111 Warning: parameter aa-hunt1 has not been registered under...

Dears, i'm in my way to configure TCL application using cisco callmanager express "Software Version 12.4(3g) / CME 3.3 ". when i read the documentation , it's instruct to download cisco Unified CME B-ACD tar archive "the default one" to your tftp server.where can i find this archive file?

Dears, i have an cisco callmanager express with one voice-port.i have to make more than 15 direct line, so I have to make more than one voice profile per this voice port. how i can do it?

i'm working at cisco callmanager express and i have created profile for each employee in the company. now i have a task to create password for every employee to use his own password to log in the phone..... can it be done? and how?

Dears, I am using cisco callmanager express Version 12.4(13r)T and actually I have alot of up's and down's that done during the day. During the call the Call Manager can be hang and then we should wait until the cisco callmanager to be UP. any ideas?????????

what's the "Configuring CM List timeout" mean in cisco ip phohne 7912???? but in the same call manager the cisco 7940 can read this list.

I'm working in company that have cisco ip phones 7940's and 7912's. all of the phones connected to call manager express but the problem is that the phones (7912's) when it open it failed in the (configuring cm list) but 7940's are working well. Can you know the reason?

Dears, I'm using cisco callmanager express Version 12.4(3g), and I have task to assign ring tones modules to cisco callmanager express. I want your advise from where i can start??

thnx for your replay, but kindly can you tell me the difference between callmanager and callmanager express? i'm serach on the internet and find nothing......

Thnx for your replay: my ios version is:version 12.4 now i want to ask whether it's correct version or i need to make upgrade because i read the document which make IVR in cisco callmanager version 12.1(3). it seems that the company will pay for this oprtion.

Dears, I have a task to configure IVR (Interactive voice response )in my cisco 2800 series (cisco callmanager express).from the documentation I read that you must configure the application that interacts with the dial peer using "Router(config)# call application voice name url" command but this...

thnx for your replay , but i want to ask again: 1- whether i should make the translation associated with with the voice port? 2- if it hsould be , can you give example about translation rule to activate our line to UAE (+971). Thnx in advance.