Search results for query: *

You can change the 4 digits to another number on an IDC table in ld 49.

Thats what I was trying to find out.

I don't know of a way to change the screening indicator. The pbx I made the test call from had the same screening indicator as yours does, and it presented the number to the far end. Is the other end of the circuit the telco? The 10 digit number that you send out, is it part of your DID range...

If you set up the npa/nxx for a test call what happens? Something else to try would be to change the ctyp fron npa to unkn

yes but is still only sending out 4 digits. Can you paste your clid table from ld 21?

I don't think that is what is stopping it. Here ia a call made from a pbx with NI2 it is from the CLG# line. I left out the calling number at the end below but the set being called displays the calling number. CLG#: 05 10 07 00 21 00 0A 00 The 21 indicates it's a "National number" and it's...

make sure your IFC matches the other end, NI2, D100 etc.

It looks like the number is being sent out as private and presenting only the 4 digit extension number 3603. It should be presented as e.164. You might try to modify the ctyp in ld 86 for the rlb by using a dgt. Try npa first.

Can you paste an outgoing msg form ld 96 set at level 2 monitoring?

It is not in the ntp's.

The dta021 means that the t-1 is down.

Have the operator hit the "excl src" key to exclude the caller from the conversation.

What number did you ncfw the 4043 acd queue to? It should point to your main VM number.

Did you add 4043 to the vsdn table?

You would have to ftp to the pbx over the elan to retreive the records. The pbx can store the records using the BDI if there is no external buffer connected to a tty port. OTM can poll this buffer.

Do you call out over the same route that calls come in on? If not does the outgoing route have supervision?

MM does get it's time from the pbx over the AML link.

If you are useing PMS through a tty port to the PMS you will need to call your PBX vendor and have them change the cls prompt in ld 15 under hospitality from fr1 or fr2 to fre.

Check out the Distinctive Ringing by DN feature.

It sounds like it is pointed to your main number.