Search results for query: *

Hi, I would like to port forward my Outside interface to an inside server. I can port forward individual ports without issue. I would like to know how to port forward a range. Example: object-group service Group1_TCP tcp port-object eq h323 port-object range 5555 6555 port-object eq www...

I am not familiar with PBR but am reading up on it now. Thanks again!

Two more question... Lets say my VPN is bouncing due to carrier/general internet issues and I want to change all traffic to traverse the PtP until the situation is stable. I know I could shutdown either Site A or Site B ethernet's interface to the Internet BUT is there another easier option...

Works like a charm!

Nice! I'll check it out tonight and let you know. Thanks again!

OK. Set to standard ftp port. ftp://anonymous@71.173.77.129 Thanks

Try this link instead ftp://anonymous@71.173.77.129:2121

You can pickup all configs here: ftp://anonymous@71.173.77.129 :2121 Let me know if you are able to download them. Again, much appreciated.

I really appreciate the time you've spent on this.

Update... I've figured out what's going on BUT I'm not sure how to fix. The SLA between the Switch A and Switch B is working when the VPN link is up and my router at Switch A isn't advertising the PtP network, 10.0.40.0 0.0.0.255 area 0. When I add the 10.0.40.0 0.0.0.255 area 0 to the router...

OK. Now that the SLAs are working, communicating, when I add the PtP subnet to my router's OSPF, the VPN goes down and the PtP is down. I did see OSPF updates when I added the below network on all devices BUT no traffic would pass. router ospf 100 network 10.0.40.0 0.0.0.255 area 0 10.0.40.0...

Unfortunately I have to make these changes at night and not during the day time. I will let you know what happens this evening. Thanks for all you assistance, by the way.

Forget my previous posts. I found an issue that was causing the SLA to be down.

Seems like one side is up and the other is not. Site A: Round Trip Time (RTT) for Index 1 Latest RTT: 50 ms Latest operation start time: 13:14:22.032 EST Thu Jan 21 2010 Latest operation return code: OK Number of successes: 946 Number of failures: 0 Operation time to live...

Yes. Site A: ip route 192.168.40.0 255.255.255.0 192.168.1.11 track 1 ip route 0.0.0.0 0.0.0.0 192.168.1.11 ip route 172.16.20.0 255.255.255.0 10.0.20.2 ip route 172.16.30.0 255.255.255.0 10.0.30.2 ip route 192.168.2.0 255.255.255.0 192.168.1.11 ip route 192.168.40.0 255.255.255.0 192.168.1.2...

OK. As soon as add in OSPF info on my routers, the PtP takes over. router ospf 100 network 10.0.40.0 0.0.0.255 area 0 10.0.40.0 is Site A to Site B PtP subnet. Is there an ospf cost I need to add?

OK. Does this change since the PtP are not directly connected to the Switch for either site? Will each sites router update the routing tables when the VPN fails?

I'm a bit confused. Site A and Site B primarily communicate over a VPN. I also have a PtP from Site A to Site B. Currently I don't see any configuration taking this into account.

Thanks for getting this to me! Should I remove the OSPF over VPN? Is it still needed?

no. If Site B is connected to Site A via VPN, ALL sites will communicate with Site B via VPN. I think this is because Site B is only sending data via VPN and isn't even using the PtP.