Search results for query: *

Has anyone hooked one of thse up to their PBX without have a SES Server? If so how? Did you some how upgrade the software on the phone to allow H323? It gets assigned an IP address from the phone subnet but doesnt give me a prompt to assign a phone number to it. HELP! :o|

Solution - The inspection on H.232 had to be removed (network side) for the phones to work.

This sounds similar to a problem we were having. The inspection on H.232 had to be removed for the phones to work.

Hello, Is there a way for my S8720 or Intuity Audix to allow a voice conversation to be recorded by pressing a pre-assigned button on a phone? Also, where is this audio file stored? Can it be moved or sent to another location for back up? Thanks, Me

This is what I get when I do a list trace (sorry had to xxxx out the number: LIST TRACE time data 10:20:58 active station 8483 cid 0x6af 10:20:58 G711MU ss:off ps:20 rn:1/1 172.21.17.1:2780 172.20.16.150:3480 10:20:58 xoip: fax:PT...

S8720's are setup at a colocation & there is a point to point between the building & colocation. The phones work but there is latency when dial tone is given. We have a pretty big pipe & only one phone is setup at the moment. Any help would be greatly appreciated.

Hello, My company is considering going to Modular Messaging from Intuity Audix but there are a few problems before going so. MM offers email notifications & retrieval of voicemail from Exchange, but is it possible to have this feature disabled until it is needed & use the server itself to act...

Hello, I need to know what version of AES I am running & can't find the correct command within Site Administrator to display this information. How can I get this information? Thanks, Me

Hello, I am not familiar with Solaris & wanted to know if anyone out here might know how I could "administer the agent count" within CMS? We're currently setup for 240 and wish to reduce it to 100. Thanks, Me

No go on the changing of the COR. I've used several COR's on the VDN and none work. I created a test VDN, Vector & have it setup with the "route-to" to point to my cell phone but it never goes through.

Oops, I meant to say "list trace station 2000" was never hit when dialing the VDN.

Below is the results of the "list trace vdn 1555"...

Hello, I can't seem to figure out which feature to enable for this to work. I have a toll free number pointing to a VDN, which points to a VECTOR that was a route-to command pointing to a station & that station has call-forwarding to a toll free number. Toll Free Number > VDN 5000 > Vector 5 >...