Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. gotogrl

    BCM 450

    I have a BCM 450 and MICS. There is a PRI connecting the 2 systems. I have a route built on both sides to dial 8 plus 4 digit extension to either side. I am able to call from the 450 to the MICS but not from the MICS to the 450. I donot have MCDN in the system. Do I need it?
  2. gotogrl

    Print available dns on option 81

    I need to print available dns on an option 81. I'm familiar with the programming but it has been a long time. would appreciate any help.
  3. gotogrl

    CICS changing from 2 to 3 digits

    Thank ya'll for your help! :)
  4. gotogrl

    CICS changing from 2 to 3 digits

    I did allow it. I set up the route. set up destination code. took out line pool code. allowed redirect on the set. Even had someone else set it up on another system and the only difference was their system was 3 digits. And their's worked. That's why I'm thinking its the digits.
  5. gotogrl

    CICS changing from 2 to 3 digits

    Trying to set up call forwarding to external number on a CICS. I have done this before and the only thing that I think might be stopping it from going thru is that the system is 2 digits. If I change to 3 will I lose any programming.
  6. gotogrl

    DHCP settings on BCM 450

    Still gives me unreachable server. I think it has to do with where I have the address for the cisco address and where I have the bcm address.
  7. gotogrl

    DHCP settings on BCM 450

    I have a BCM 450 with a cisco switch. The BCM IP address is 10.10.11.1 The cisco is 172.31.200.10 I went to my ip resources and changed my DN range. When I did it changed something in the DHCP settings. Now my ip phone will not come up it says server unreachable. Can you tell me what the...
  8. gotogrl

    Cisco 7940 held line reminder timer

    I have a Cisco 7940 that I have turned on the held line reminder. I can't find where to set the timer on it so that it alerts them at 30 or 60 seconds. The phone is working on a switchvox smb system. Any help would be appreciated.
  9. gotogrl

    Help on BCM 400 with remote i2004 sets.

    MPLS connection.
  10. gotogrl

    Help on BCM 400 with remote i2004 sets.

    I have 3 locations. Site A will house the BCM 400. Site B will have 15 i2004 sets. Site C will have 7 i2004 sets. What do I need on site B and C as far as type of switch? the PRI provider is providing the router at each site. Thanks for any help!
  11. gotogrl

    Nortel and Predictive Dialer

    I have a customer with a BCM 400 and Intelligent call center. We are trying to find and outbound predictive dialer for under 15,000.00. Any recommendations would be helpful. TJS

Part and Inventory Search

Back
Top