Search results for query: *

I have a request that customer wants to mute their hand set when on 3 way call. The only mute I see is for hands-free. They are using M7208 phones. Can handset be muted?

Try resetting the system and try again from sta 100 or laptop. Sometimes system will lock in programing and not let anyone in. It acts the same as invalid password.

Is there a timmer for hold recall? If a 2616 presses Hold button to put a call on hold will it recall? What timmers or class apply. I looked through all my books and found no reference to this.

CCR is custom call routing. To check log into ADMIN Press "other" then "ccr admin" then tree 1 then "modify". When it asks for Path enter 1. You can't screw anything up here without disableing first elsewhere but you can find what mailbox is under path 1.

It sounds like a cable problem to me. Hook a jack right at the ksu with jumper removed to affected extension. Plug same phone into jack, and test.

The one-way audio is not just IP phones, I had it happen on internal, tie, and pri calls

When marking phone for outing I change the DES to month year disabled like XFEB06. I can list in LD81 and if I do a DNB it shows up as marked phone. It also allows me to know how long disabled. I shoot for at least 2 months before outing.

I was finally able to swap cpu's and one way audio stiil exsists when I hit talkslot 30 from loop 20 0. Any other ideas? I was thinking 3PE card but I have to schedule down time for that.

This sounds like a Norstar. If so go in to line access and that line one is not set to appear and ring on set in question.

I am having trouble with one way audio and by using ld 80 trac l s c u dev comand have been able to narrow problem down to "TALKSLOT ORIG 30". Could anyone tell me what this is pointng to? Here is whole trace: .trac 20 0 5 5 dev TN 020 0 05 05 KEY 0 SCR MARP ACTIVE TN 020 0 05 05 ORIG 020...

Like all modern key systems the Norstar detects ring and generates ringing signal to sets. If line is answered before system it takes a moment for system to stop generating ring cycle. The only thing you can do is to put system phone in location to answer and turn ring off on call id phone. If...

Verify telco is sending disconect supervision on all lines. With a meter and a butt set verify line goes to 0 volts for i sec after remote party hangs up.

Have you verified from a idle phone that if you dial 8xxxxxxx that it conectes to cell phone