Search results for query: *

Are you manually setting the phone's addresses? If you uses Windows server dhcp you will need to add option 151 with the address of the avpp and option 176. I have the ap-8 working with the phones but need to get wep active. On the ap8 the main settings are config/interfaces/wireless b/ change...

Night time should be 17:00 to 11:59 and 0:00 to 7:59 m/f and 0:00 to 11:59 s/s

Is it best to have all ap's with the same ssid or will the phones report to different ssid ap's seamlessly?

I do not have a problem with the 1 u dell servers running voicemail. They do not have a soundcard but they are running server 2003

Follow the above from sizbut it works. have 3 goto a menu with ?? and a time out then the transfer is 3$KEY for ?? and the time out will have a transfer to the group you want do the same with 4 and 5 also

Can the AVPP info be added to option 176? Or has any one added the option 151 for AVPP to a kentrox's dhcp?

Is their a default report in ccc to show when all users are logged out or in dnd?

Have you stopped and restarted the voicemail service?

No conference bridge on standard.

delete all other bootps and reboot then try again.

Put the pones you need to pick up in a group and assign a group pick up button or short code.

Part of our standard setup is to turn off AGC due to the amount of echo.

Point your Bootp entry file to the ip401ng.bin in the V3_2_999 floder under the manager directiory. Once this file is loaded on your SOE you can upgrade to 4.0.7

Your night should be 12:00am to 8:00am M-F 4:30pm to 11:59pm M-F 12:00am to 11:59 S-S

The automatic intercom was the feature you wanted to use back before 3.2. Now the only thing I have found that works similar is direct dial under advanced options not emulation. I have not checked if it still works in 4.0.10.

Turn off AGC on the 5420 phone under options.

What is everyone doing with respect to a holiday menu? Is the best way to setup a test condition and have a basic holiday menu which you change the recording before each holiday?

What version supports Call queing on remote sites? Do I need to be on the latest 3.2.57 or does this only work on 4.0?

No. Should this be turned on for the queueing message to play?

Should the Queue message play when a group has a single user in dnd and Queueing on? I have a group setup in vm pro with a queued start point going to a queue position but do not hear the message when calling that group. I see in system status that the call shows as queueing but I only get...