Search results for query: *

AZJOBU, you were right ! The following command (isakmp nat-traversal 20) fixed my VPN connectivity issue. I really appreciate your assistance..Thanks again.

AZJOBU, thanks a million.. I will give it a try tomorrow..I really appreciate your help.

Wirelesspeap, thank you very much for your help. I will give it a try tomorrow..thanks a lot

Is there anyone out there who might be able to help me. I would really appreciate your help. I have been working on this issue for several weeks and I have had no luck getting the VPN to work. Any help would be appreciated. Right now, I am to the point where multiple users can connect to the...

It says Unlimited IKE, do you think it's a license issue..?

I need an advise from you. I have a PIX 506 configured with IPsec for VPN access. I got it to work to the point where multiple users are able to connect to the VPN, but the problem is that they can't access the network or the server (10.0.17.240). This is very strange because whoever connects...

Remote users are connecting to the PIX via IPsec. Here is my config so you can take a look at it..I appreciate your help. PIX Version 6.3(4) interface ethernet0 auto interface ethernet1 auto nameif ethernet0 outside security0 nameif ethernet1 inside security100 enable password 8Ry2YjIyt7RRXU24...

I need your help guys, I have a PIX 506 and I finally got the VPN to handle multiple remote connections simultaneosly. The only problem I am experiencing right now is that remote users cant' ping anything inside the network when they get connected. Is there some type of setting I would need to...

Thanks NetworkGhost ! I really appreciate all your assistance.

Guys, Could you help me out on this issue. I would really appreciate it. I can't figure out why my PIX 506 will not handle multiple remote connections. It only allows one remote connection. I checked the configuration and I notice that I only have one crypto setup.. Could someone check the...

Thanks for your response NetworkGhost. Here is my config. Please let me know if you see anything wrong with it. PIX Version 6.3(4) interface ethernet0 auto interface ethernet1 auto nameif ethernet0 outside security0 nameif ethernet1 inside security100 enable password 8Ry2YjIyt7RRXU24 encrypted...

thanks bubarooni, I will give it a try !!

I have a PIX 506 E. I got the VPN working. However, it does not allow multiple VPN remote connections. It's only allowing one connection. Does anyone have an idea of what could be the problem? I found out that this PIX can handle up to 25 connections. Please help me..

Please help me out on this issue.. I need an advice from you guys..The VPN is not accepting multiple VPN connections for some reason..

Hello guys, I am having trouble with my VPN Firewall. It only allows one remote VPN connection to it. It can't handle more than one connection.. If someone else tries to connect, I will get disconnected. Do you think it's a license issue or something? I need your advise.. Thanks

I need your help guys, I finally got the VPN working at the office using IPsec. Remote users can now connect to VPN and access the Medical Database just fine, the only problem is that they can't access the Internet while they are connected to VPN. I configured the right DNS addresses on the...

Thanks NetworkGhost for your prompt response. By any chance do you have any documentation on how to set up IPsec on a PIX..

Hey guys, I need an advise from you. I am trying to set up the VPN on a Cisco PIX 506, but it's giving me an error at the end of the VPN wizard. ERR: vpnd enable outside CAN NOT ENABLE VPDN ON THE SAME INTERFACE AS PPPoE On this PIX, I only have two interfaces. E0 and E1. Ethernet 1...