Search results for query: *

Hi, i got new MC32s card and it got booted to IPL prompt and IPInfoShow shows no IP configuration, A sig server is already working a Leader and i need to configure MC32s as follower, how do i start programme follower and ELAN ,CLAN IP from IPL prompt Regards

DNUM 15 is assign to DCH 18 and 19 and both PRI (DID and TIE) working perfect and still system got stuck due to DNUM, in TIM data FOPT is set to 6. Any more advice coz i wants to avoid any stuck problem in future again. Regards

Hi, We are using a third party firewall (Juniper) in our LAN, we also have a CS1000 release 4.5 with mobile voice client license. I need an advice for VPN client software for our windows mobile 5 and 6. Which VPN client is recommended for mobile voice client?

DCH 19 is TIE PRI with other option 11c release 4.5. There is no SDI 15 configured, last TTY is 12. Loop 24 is a Superloop having analog extension. Can somebody advice what is SDI 15?? and who was the main culprit of system down? Regards

Hi it is CS1000M,SG release 5, below is the print of some error from history file, System was stuck and no dial tone on any extension and after INI system gots OK. Any advice/suggestion after checking history??? History -------- % DTA107 9 % % DTA301 18 % % DTC001 % % % DCH: 9 MAINT INDICATION...

Hi, it is CS1000M release 5. I have 15 COT lines and M3904 as Operator console, now i wants to assign these 15 lines to Key32 to Key46 of CAP module, operator should be able to press any of these key to access line as well as by pressing access code 9. Extension should also pick any of these...

no before PBX trunks are working OK its the PBX where i get this problem

Yes i already said that when i test a single trunk it gave same error, i mean some times dial out gets OK and some time silent.I tested random trunks by accessing maintenance phone. Any more advice?

I was reading a post about this and getting to tool menu by resetting flags to 0x400. Is it possible? Regards,

Hi it is 61c release 4.5 having 40 COT lines. I am getting random problem with dialing out,when i dial out any number using route access code some times i get silent after dialing, i get the PSTN line tone OK after dialing access code but after dialing any local or long distance i get silent but...

Any help?

Hi guys below is the print of patches , i think the rquired patch is in there but i am still getting that problem Note that after loading patches i didnt Sysload PBX, do i have to do INIT to get that work? Regards IN-SERVICE PEPS PAT# PRS/CR PATCH REF # NAME DATE...

Hi it is CS1000M Cabinet(SSC card) release 5. Am getting following error during LD 43 EDD how ever EDD seems to complete OK but at every EDD i am getting these errors SYSCFG_MGT ACCOUNT_MGT ERL DB SUBNET DB ELIN DB BANNER_MGT ERR193 Invalid NTP table CHECKING RECORD COUNT =...

Hi it is CS1000E release 5, having 10 IP soft CC agents and 02 supervisors. We are getting periodically the BUG error given below, note that this TN is of Supervisor. Any advice for this error? % BUG6504 % BUG6504 : 252 0 0 10 % BUG6504 + 00BFD7FC 25F5CFF7 00B97361 00B963BF 25FA8AA0 %...

Hi I need to get the Tool menu of SS without using compact flash having SS OS. In NTP it is mentioned that "reset flags to 0x4000 to get to the tools menu" But that doesn't work. How do i reset these flags to get tool menu. Regards

Hi Pal, it will be helpful and easy to read if you paste here in excel form or as an attachment.

Sorry for both inbound and outbound faxes.

Hi all, i need to disabled Fax cover sheet on my all inbound faxes. in FAX SDN the option of cover sheet is checked and grey , i cant unchecked it, i dont know why it is grey, could somebody help how to disable FAX cover sheet. It is call pilot 600r release 5. Regards.

CONV 0c04 CONV 0c98 Gave 2 TN which are unequipped, tried disabling both card but no solution however when i create 2 dummy extensions on these 2 TNs the AUD error gets stop (note that both TN are faulty), for a workaround i created dummy extension on both TN`s. Any more advice?

Hi it is 61c Release 25.40,I am getting AUD029 continously on screen, it actually happened when we changed the time of PBX one hour decrement due to state policy for winter in APAC. When i convert CONV 0c04 it point 12-0-1-0 which is unequipped, i also disabled that card but problem still exist...