Search results for query: *

This just gets more confusing. I have some phase 1 sets that will register and some that will not. None of the phase 2 sets will register. The phase 1 sets that work are used. The phase 1 sets that do not work have never been registered to any system. The phase 2 sets will register on the BCM50...

I have a bcm450, release r6, that I have no problem getting i2004 phase 1 sets to register. It is the phase 2 sets that will not register. All are used sets from other locations. All are provisioned the same. Even connected directly to the bcm, the phase 2 sets don't want to play nice. Anyone...

I have changed LAN ports on other BCM products in the past in order to conform to some networks. The difference may be that I always label,on the switch, what IP addresses are assigned to which port. It would appear the 450 is a different animal from it's predecessors. Lesson learned. Go here...

Thanks. I am not on site right now but I will try this in the morning. I did find some similar posts with a link regarding this same procedure on a BCM50. It involved F9*8. It did not come up exactly as described but by some experimentation, I was able to see what was wrong and make the...

This is my first 450. Sadly, I did not read some of the posts regarding the LAN ports on the 450 and I tried to change both the customer port and the OAM port due to conflicts with the customer network. This was in preparation for installation of some IP sets. Now the 450 hands me the same...

What's with the lines? This ought to be about routes and destination codes for PRI access.