Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. SnoProG

    VLAN tagging and default VLAN

    I had a BPS2K five unit stack have the static VLAN just disappear. Well, being that the config was not backed up, yeah, I had to locate all the devices with static assignments and match their MAC with the switch forwarding table to get the port number. I had 25 devices to add to the new static...
  2. SnoProG

    8691SF defaulting SNMP/user/pass and reset button

    Andy, you're talking about "monitor" mode...right. Ok, I'll try all advise tomorrow and report back. I need to work more CLI, I know. Thanks for the links DaddyofThree
  3. SnoProG

    Changing IP on Management Port on Passport 8310 switch

    I have 8610 cores. My Nortel book from my 8600 cert tells me that the managment ports on my 8691SF cards are isolated from the production network and the IPs will not show up in the ARP table. I can't see what you did would cause that problem. Maybe your configs were never saved and the boot...
  4. SnoProG

    Nortel 55x0 stack problem

    Did you connect via console to the suspect switch by itself to see if any errors showed up on power up.
  5. SnoProG

    8691SF defaulting SNMP/user/pass and reset button

    How do you default the 8691SF. To get full access to start a new config on the flash, is it as simple as pressing the reset button on the sf. I did do this, assigned an IP to the management port, got access via Device Manager. Via console, rwa/rwa did work; my problem is using DM to edit...

Part and Inventory Search

Back
Top