Search results for query: *

OK I checked and I have a partner mail vs 4. The submenu,you have 2 recordings and from that message I can't get dial out of the menu it says invaild choice. They are looking for the auto attn. to do this. -4 xfr to ext # -5 give depts. then xfr to ext # -6 give names. then xfr The problem...

I have acs 3.0 with the 4.1 partner mail. I'm not sure if the voice mail has that feature,my other problem was the DND goes to x10 I saw that it's a problem with the system. What could I get to fix the problems. Thanks for any info!

Thanks Rivet I thought it might have to be done, I'll try that.

I tried 2 different cars 1 at a time in both spots. In program 109 I think default was c,e co card bottom slot,station card top slot,but didn't get any thing out. Not sure what to look at next. Thanks for the info.

I'm programing from x101,I have 2 stn. cards and did move to other slot,just had 1 plugged in at a time. I can see the change in programing. I didn't know if I was missing something else. Thanks for the input.

I'm adding a 8port digital card to the 8/16. Plugged into the bottom postion,went to program 109 in that area (c:e)I changed to e:c then saved turned power off. But it dosn't seem to see the card. When T/S I had 2 different cards plugged into the slots. The cards came off of 12/32. Not...

Thanks for all the info,I'm working on getting the files,is there any 3rd party tech support for the ip wireless handsets I can't find any? and agin thank to everyone!

Looking for files for handset and gateway.I'm getting errors from both on some files. I think I have the gateway programed but the bcm on the ip set not sure any manual out there or would help Thanks for aany help.

Thanks for the info,But really I don't see where I can choose to use the modem or lan connection. When I use the mgr. it always makes me use the ip address. Big time lost on it!! Thanks for the help

night ring restricted - can not find way to correct - doing programming from key set - press feature 871 - please advise - thank you

I need to remote program a bcm50 through the modem but I don't see area in the manager to do this. What am I missing or need to do this? Thanks for any info.

Thanks for the code,but i'm not on site I'm dialing in through the RAD. I don't see a feature code to move the line through programing when I'm in button programing. Thats my big problem. Thanks for more info

I'm trying to program a 6.1 mics through a frad. The problem I have is I don't have a clue on how to move a line to a different button after I program it. Thanks for any info!!

I have a kxtd-1232 with vmail,it seems since we put the vmail on the system x101 and other ext#s can't get line 1. They press the line and get icm tone.The line light is flashing green, if you press it you just get icm. tone,to fix we unplug the phone.I'm lost on this one!!! My 2nd. problem is...