Search results for query: *

Hi i have an executive extension M3904 having 4 kesy programme as Key 2 programme as PVR Key 3 Programme as PVR Key 4 Programme as HOT D Key 5 Programme as HOT D Now when the caller dial an out side number using one f HOT key or Private key and wants to do a conference using other HOT D or...

Any help?

Hi all , Need kind help of yours.I have following setup configured (CISCO router 29XX series) Nortel PBX(rls5.5)---E1-->CISCO Router----->CISCO Router(FXO/FXX Port)--- Analog Tel Set i am having problem of dropping call exactly after 2 minutes and 45 second. Analog set located at remote site...

Thanks Pal, I got it from my old data...but i am unable to find IPT software on web, can you please point the exact URL where i could find IPT and IPL software in future.

If you have some other digital set working then you can copy that set to new TN by using CPY command using LD 20.

BUSTER?????? still waiting for your own resolved answer...

Hi Guys, Sorry for delayed reply, I get dead air after dialing AC@ at remote extension, let me explain a bit more, Nortel PBX is tied with a CISCO Router using E1. an analog extension is connected with FXX/FXO port of that router. When that extension dials AC2 to reach Nortel PBX trunk it gets...

Hi All, Can somebody point an exact URL for downloading IPT software "ipt30160.sa", i tried Nortel website/Avaya SSO partners site but could not found IPT software even search within Avaya and Nortel website wont show any result....Can somebody guide how to navigate avaya website to find IPT...

I am dialing AC2 and not getting dial tone. I also tried route access code and still no dial tone after access code but if i dial the outside number i get through and call gets OK..it is the dial tone giving problem, user should get dial tone after dialing access code...in LD 86, ESN, DLTN is...

Hi i have 02 site connected with CISCO (E1) router using E1. 61c rls 4.5 and 11c rls 5.0. I have made 02 TSC (also tried DSC) code at 11c site so that at 11c site user may use trunk lines of 61c. I cannot get dial tone after dialing TSC (or DSC) how ever if i dial number after TSC code i get...

Hi any more help?? Still struggling with the same the Dchannel which i replaced have Eng. Code= NTWE07 and NTMF93 and it is working OK (it was at my toolbox and it is an old PCMCIA)...i got 02 other Dchannel PCMCIA card whose Engineering code are NTMF93 and NTVQxxxAE5. the faulty D channel has...

Avaya peoples life was in pain and now Nortel peoples also getting this pain due to Avaya Website partners access policies, there licenses policies etc....

Hi all, the Dchannel which i replaced have Eng. Code= NTWE07 and NTMF93 and it is working OK (it was at my toolbox and it is an old PCMCIA)...i got 02 other Dchannel PCMCIA card whose Engineering code are NTMF93 and NTVQxxxAE5. the faulty D channel has also Eng code NTMF93 and NTVQxxxAE5. IS it...

Can somebody knows how to repair this card?? as it is not used as storage device as other PCMCIA, i tried to read it contents but not succeeded. Can i use same D channel PCMCIA for both 11c and 61c??? or could somebody mention exact engineering code of D channel PCMCIA for 11c? Thanks

Here is an update... after changing the PCMCIA for IPT DCH the dcahnnels comes up and now working OK..Thanks for every body...Can somebody mention the Eng. Code of PCMCIA which will be use with SDI/DCH card for 11c???

It shows LDR after boot, but the Dchannel which wont show UP and channels stays disable after boot, when i disable/enable channels got lockout and Dchannels stays AEST....Card LCD status is OK and showing LDR... Any more help

Hi all, need your help as i am struggling to configure ITG ISDN trunk. I followed IP trunk guides but every time when i transmit data from OTM(TM 3.0) to ITG it gets OK but after reboot ITG TN (IPTI TN of MC32) always stays "locked out".and Dchannel always stays on AEST........after every...

Hi Pal, Can you please put a sample configuration of following 1- AES integration steps with Avaya server for witness recording or 3rd party recording machine? 2- Document having Configuration steps of MM from scratch. 3- Dialing plan with following info Dialout(local/mobile/IDD)...

Hi.You are making life easier of those who started to get into avaya stuff... It will be of great help if you put some sample installation guide(with dummies data etc IP, numbering plan etc)of avaya enterprise systems. Further we will also be thankful if you put a complete dialing plan guide...