Search results for query: *

HELLO, I HAVE A PROBLEM WITH H.323 IP TRUNKS BETWEEN AVAYA CM 5.2.1 AND MD110. THE TROCALS ARE UP AND THE CALL IS PERFORMED BUT I DO NOT HAVE AN AUDIO BETWEEN THE 2 TEAMS. EITHER THE CALL ID WORKS.   I HAVE 2 CLIENTS WITH AVAYA CM THAT NEED TO CONNECT AGAINST THE SAME MD110. ANY IDEAS? VI...

ok, update phones to 2.9 sp1 and change the 46xxsetting as indicated results when I have them notice thanks to all

is true, the Manager of IPO has a TFTP Server. this case is focused on CM 3.1.2 However, this issue is related to the 4602 specifically, so it also affects IPO

thanks for replying, this is one of the options that I'm driving, but the client does not have a TFTP server and I install it on the laptop Tomorrow I should be doing these tests

I put this thread again, as the former gave no final answer http://www.tek-tips.com/viewthread.cfm?qid=1067448 IP 4602 are about 25 + who are presenting this problem. when spending time with no activity, low ringer volume to a minimum audible. I'm thinking it is a firmware problem (2.3) of...

I have 3 VLAN, VLAN 1 for Management, Vlan Vlan 2 for 3 for Data and VoIP. Voip is AVAYA IP Phone 1608 with MAC which is 00B4-4fxx-xxxx. I need that 3COM 4500 switch ports where IP phones are placed only accept AVAYA devices. I wanted to create an ACL rule that filters the traffic but not how...

S8500 Server, G250 Media Gateway, CM: The status license is Serial Number mismatch Document Id: KB01076980 Last Modified Date: 06-10-2009 Support Goal(s): Communication Manager, G250 Media Gateway, G350 Media Gateways, G450 Media Gateways, S8500 Server, S8510 server, S8700 Server, S8710...

from a few days ago that I was presenting the same problem. "Achievement solve it? What did you do?

I have a S8300C IN AND G700 need to put a channel for Loudspeaker Paging. As I logged in to paging? Configured as an extension analogy? I have no idea

SSMaterials, exactly what you did? I have the same problem that you (by the image of the viewer is the same). As arranged?

Thanks for answering, E1 CAS is with MFC R2 signalling, as far as I understand, but also need to know the details of the trunk group, if type tie and what kind of signage at the trunk has MD.

Boys and girl, I need a favor, I am setting up a link between MD110 BC8 and Avaya S8300, 1 E1 (must be type tie) currently are MD-MD, but we will migrate one of the MD. Parameters of MD are either difficult to understand and do not have staff on hand Ericsson tell us that we need to do...

My trunk line are equipment TELULAR (CDMA wireless trunk). The IPO is not detecting the ring of the lines. IPO 406V2 3.2 (17). Previously we had 3.2 (59) and ringing well, but was producing problems since the trunk stayed retained and I had to grade down to 3.2 (17) And change the locale...

Just need to be made to release the update on March 2 annex note of release. 2.10Web Interface In past software releases, users were unable to change the ”Power Max” value for individual POE ports. This has been fixed. If an SFP was inserted and there was no physical link to it, the web...

You must create a route to destination blank for the incoming calls did go to the extension is correct. The RemoteUser just what to create in the SAR with the same password that the user creates

yes, gbic running and showing link

I have 5500G EI using several Gbic SX. When access switch via Web, throws the message to me “Device Status: GigabitEthernet 1/0/1 send failed” and this way for all the fiber ports. I have looked for reference but I do not understand that it means east message. Somebody can help me with this please

I HAVE 5500G CONNECTED WITH TWO GBIC FIBER TO 4500. I MUST FORM SOME THING WITH THE STP? IT SEEMS THAT ME THIS GENERATING PROBLEMS BUT I AM NOT SAFE SOME AID PLEASE

I have 5500G like the Cores and 4 stack of 4500 connected by trunk (to fiber optic) Core. I have several VLAN, one by stack, plus the VLAn of server´s. As I must form the VLAN or trunk in the 5500 to allow I deal between VLAN and as gateway of my users is default that must assign the DHCP

1.- enable file location clan login password 2.- windows msdos: cd \ firmwarefiles ftp address clan binary put filename.bin 3. change file download