Search results for query: *

Is a backup WDS configured the same as the primary WDS except for the priority number? Thanks!!

I'm not sure this is where I should post this or not, but was wondering if you might be able to help.... I am using a WLSE and trying to archive the configurations but receiving this error... Please make sure that TFTP traffic is not blocked between the access point and the WLSE box. Can...

figured it out. Had to add wlccp wnm ip address

Hello all. I am setting up several WDS APs via Cisco's documentation. I am also using WLSE to monitor these devices. I have set up my WDS AP and several infrastructure APs, it all looks to be set up correctly. I can see on the WDS AP that it finds and registers all other AP's. My problem is...

Thanks :-)

How do I make it so that my SSID is not broadcasted? The following is my current config.. sh run Building configuration... ! enable secret 5 ! ip subnet-zero ip name-server ip name-server ! ! aaa new-model ! ! aaa group server radius rad_acct ! aaa group server radius rad_mac server...

Hello. I am the Network Administrator of a college campus. I have several administrators requesting remote desktop access to their office machines. Does anyone know how secure this is? Remote Desktop is blocked via our firewall and I would have to open up the port for the particular office...

Figured it out. It was an acl blocking it.

Yep..... It is all the same.

Thanks RNF0528. I'll take a look at that. What is mind boggling is that I have another AP that is configured the exact same way and it works.

No luck. Any other ideas?? Becky

Thanks. Here it is... no service pad service timestamps debug datetime msec service timestamps log datetime msec...

Thanks... I have snmp-server community xxxxx ro snmp-server community xxxxx rw snmp-server enable traps tty And still not working.... Any other ideas or do you see what I am missing?? Thanks, Becky

I'm having a problem with my access points and web access. I have entered that command ip http server, but am still unable to access via http. Any ideas?? Thanks, Becky

I am running several Cisco 1200 series Aironets. Some are open wireless and some are mac authenticated. Windows XP users can connect to either fine, but I can not get any of my Windows Vista users to connect. Does anyone have any ideas or thoughts? Thanks, Becky

Got it. Thanks to everyone for your help!! Becky

OK. I'm getting closer. I have hooked up to ethernet and set the IP_ADDR, using the tar -xtract tftp: flash: command, I get the following error- Tar checksum error in tftp: Any ideas on checksum error?? Thanks, Becky

Thanks ADB100. that's probably why I have been having so much trouble getting the IOS back on. I'll try on Monday and post back. Thanks!!

I'm trying to follow the directions from Cisco and am having a hard time. Step 4 says to assign an ip address, netmask, etc. Why? Should this be a working ip address? And, does the access point need to be connected to the internet...

Thanks justnetworking. I did a show ver and this is what I got... C1200 Boot Loader (C1200-BOOT-M) Version 12.2(8)JA, EARLY DEPLOYMENT RELEASE SOF TWARE (fc1) TAC Support: http://www.cisco.com/tac Compiled Wed 12-Feb-03 15:23 by hqluong I did try a copy tftp flash and I get tftp: permission...