Search results for query: *

first of all where are you all located? 2nd I would be more than glad to give you maint. contract on your system since it sounds like most of your issues are programming or MAC work. With a maint. contract your dept. can budget that amount every year and you know that our phone support will...

Thank you.

how do you determine what the extension numbers are when the voice mail is in the ACS processor card on a 5 slot carrier

does anyone know where I can find a manual for Innovations Innline lite or LT. I need to program an autoattendant for a SX-50. I have no problem buying the manual but like every good phone man I will take the free one if available

Can you put a PRI card in CICS

ok I will give it a go. is that something you have found to work?

I have some people saying that they are not getting notified of msgs (regular notification on set)until 3 hours after delivery?

I interfaced the HAI software through the CTI card and I was pleased with the ease of the integration. there are still some things I need to program on it but it does wake up calls and sets msgs things like that. we are going with ez ADVANTAGE call amatic for the cas interface to the pms. Like...

I dont think we are going to bill from it as much as we are going to use it for wake up calls and resetting voice mail and the like we will probably interface the smdr to a PMS system for call billing

well first off let me qualify myself by saying I dont have predictive dialers on any tda 200's \ next let me say that you are trying to interface software to a proprietary switch. I think you need to be looking for some hardware that will interface through DTMF then its a matter of (1) setting...

I liked it enough I only had 2 336's both with 3 cabinets and PC attd consoles But that was the way I was trained on the 336 so I am partial to it

it was the TAPI software I also have used panalog and I wasnt overly impressed with it. I cant remember exactly why but I just remember I wasnt liking it very much my partner installed it ands seemed to work just fine but we ended up using an old CAS box to interface with the hotels PMS. I am...

thanks CWC3 that is exactly what I was looking for!

thanks anyway guys there was once a piece of software on Panasonics old b2b site that does what I am talking about. I just need to keep digging around here and find it

I am installing a 200 in a hotel and I believe that there is some CTI software out there for the hotel industry that shows room status and wake up calls and things of that sort and my question is can anyone send me a copy of that software or the link to where i can get it as far I know it is...

yes the suma pro is CAS made XIOX so far we have got the vmail and CAS working there is no data set on site to interface the PBX so we are ordering one and do you know what the maid codes are? software Gen 1004 E29.2 I guess we got a little lucky the Innline had a default setting for the PMS...

I am interfacing a XIOX suma pro and an opera PMS to the mitel is there anything on the mitel side I need to know other than port config?

panda it is a sx 200 digital generic 1004 release E29.2 I also need to get connected to the maint. term on the connector in the front of the switch

do you have calls transfer to mailbox enabled in mailbox config if so turn it off

co to co disconnect setting in your COS and the DTMF problem can also be fixed I have worked on it before but I cant recall the fix or if it wasx just a short coming of the PBX but I am pretty sure there was a fix. Ill post tuesday if I remember