Search results for query: *

I have verified that it is a Digital Line Card.

Thanks all.

Sorry, I have tried another set.

At the IDF is 28 vdc and at the site in 19.2 vdc. I do not believe that is too much of a voltage drop.

I have another set.

1. Did you measure the DC voltages on IDF TN ..? I think voltages should be 28 or plus.. 28 VDC 2. Did you tried to move the set to other TN ? Yes 3. Change the fuse / surge protector on the IDF TN. Yes 4. Try another set on the same TN. Yes The RLS key is not stuck.

thread798-1222751 I have a M2616 phone set on I am receiving blinking Key display on the phone. I did an IDU and receive a NPR0503 (Response timeout from IDU (2 seconds)). I have reversed the Tip/Ring and phone is completely dead. I have verified that the TN is a Digital Card and the Config is...

Are there call stats on a Opt 81c/CS1000?

I have never heard of this term but I think it used to choose another LD carrier other than the one that is set up for by the local provider. What has been explained is on accessing my local trunks (99) and then dial a PIC (1010288=ATT), you can set up your local trunk as an overflow from your...

In the DMS/SL family, there is a command of TRAVER ( Translation Verification). This is where you input your originating trunk group and the dialed number and it will give you the general tables that are used as well as the routing. Is there an equivalent in Option 11c/81c environment? If not...

Point me in the direction for information on SPRE, that could be the missing piece.

I have the two DN's as SCR and all others as SCN.

I have CLS PUA, DPUA and GPUA to both TN's. Both have RNPG 25. It still does not work. Does it matter if there are other DN's assigned to KEYS but are SCN? What am I missing?

The conversion program is great and a big help. I have the two DN's set for group 25 but it still does not work. I was thinking of changing the KEY to SCR for both number on both stations.

Thanks for the help but I see the DN's in other groups but not the one I enter RNPG 25. If I do a LST in LD 81 and PUA is the FEAT, that is where I don't the DN and TN just the TN's.

I have the standard opening statement, Not familiar with the option 81 but I have back ground with DMS family and the option 11. I need to remove a DN from an existing Ring Group, I believe the option is RNPG and create a new group. I choose 25 as the RNPG and when I do LST in LD 81, I see the...