Search results for query: *

Need to set up alerting so that when a hotel guest dials 911 the front desk or others can be notified. I know there is a method that will alert several people and allow them to conference in on the call, but that may be an add on feature. If I could just get it to alert the front desk or...

Alrighty, final post (i think )on this subject. Figured out that somehow the admin & guest special access codes for 0 got wiped out by me changing ASAT. When I deleate the ASAT and went into both AASP and AGSP and added a acc for 0 set to ssc and 2, calls worked again. Man I need to learn this...

I think what may have caused this...I was following the feature programming manual. Step 3 of setting up an att is ASAT-assign identification numbers to the specific att consoles. I went in and put tenent 1, acc 0, atn 1. I thought maybe this was the issue so I deleted that entry. This caused...

ok got the console up. was a either bad cord or jack in switchroom. Now that I put it in, calls are only going to this new one and not the two original consoles! HELP :(

Thanks for all the help so far. Getting closer. When I looked at rt 901 tk3&4 I realized that was the LENS of the existing desk consoles. I looked at TK 1 and found that to be the LENS of a CS08 card that was backed out. I put the SP33 card in that slot but the set still didnt come up. I outed...

I now have a sp33 card and have put it in slot 23, I do not see the operational light come on , nor do I get anything on the console hooked up to it. I did take the new card and put it in the slot containing my exisiting sp33 and it lights up and works just fine so I know it is not the card. Not...

Thats what I was afraid of. Thanks for the reply.

I know very little about NEC so am here with a few question. Hotel puttin in a 3rd desk console (SN 716 desk) in a back office to help with calls to the front desk. Not sure what the difference is between a desk console and an Attendant Console. I found the existing two desk consoles are on a...

Thank you thank you...thank you.....in aanp under 1stDC of 2 and hooking was set to NND of 1. Changed it to 4 and that fixed it.

Thanks for the response, These are admin DID's. I will be at this site tomorrow and give this a try.

Thanks for the reply. I should have mentioned this is a hotel/motel package. ASPA command is "not in the system". I do have AASP in the Hotel/Motel. I put 25 in there and then in the SRV I try to put in STN. It will not let me put the T in. I look at the MAT help and STN is not a valid entry...

Set relocation allows you to move your phone to another location and all programming goes with it so you don't have to move the cross connect. It means you don't have to call a vender when you move offices. Bad thing is, as you have discovered, that when you have a bad phone and use another one...

not an NEC guy here but we have a customer with an NEC IPX 2400 so guess who gets to figure it out? Issue is that not too long ago we added some additional DID's to the system as they were out of free ones. the group we got was 25xx. A problem has been discovered where when a user gets a call...