Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
Pix 501 won't establish IKE / VPN
Sorry, I should have updated this post long time ago. There was no problem to begin with. The issue that caused my irritation was the fact the the Pix will actually not establish the tunnel right away but only when it sees traffic. Unlike the other VPN gear I was working with before this led me...- TillmanZ
- Post #3
- Forum: Virtual Private Networks (VPN)
-
Pix 501 won't establish IKE / VPN
Hi there, first off I need to tell you that I am a complete cisco noob so please bear with me. I simply want to create a site-to-site VPN but even after hours of trying to setup up this (rather simple) config I still cannot get the pix to actually try to establish the tunnel. The way for me to...- TillmanZ
- Thread
- Replies: 2
- Forum: Virtual Private Networks (VPN)
-
-
Basic BGP setup
This is what I have done so far: create vlan Upstream1 configure Upstream1 add ports 1 configure Upstream1 ipaddress 62.100.100.101/30 enable ipforwarding Upstream1 configure bgp as-number 45678 configure bgp routerid 62.100.100.101 configure bgp add network 123.123.123.0/24 create bgp...- TillmanZ
- Post #2
- Forum: Extreme Networks networking solutions
-
Basic BGP setup
Hi there! Could anyone help me with some step-by-step instructions on how to setup the following scenario: Summit48si Port1 connected to ISP My address space 123.123.123.0/24 - AS45678 ISPs router: 62.100.100.100/30 - AS1234 My transfer net: 62.100.100.101/30 Port 10-48 VLan "Main" with...- TillmanZ
- Thread
- Replies: 3
- Forum: Extreme Networks networking solutions
