Search results for query: *

Yep, I got that part right! Thanks Missedit!

Ok will do thanks Marv.!!

I have a copper 6-prot expansion card in the cabinet (KSU) now. So I can just hot plug the station module w/o powering down the KSU. Correct please?

Folks, I am adding a station module to an 824; do I need to turn down the KSU or can I add it just like an 0x32 please? Can't remember... been to long...just an 'ole retired phone guy.

Hey guys, thought I'd let you know it AWS an open pair on the Amphenol plug; thansks for the help!

Hey Brian, I figured the same about a powered stand-alond speaker as well, and there may be one there, but I know there is a separate 100w amp w/70v line somewhere in the building too....I reseated the amphenol connector last nite...tonite I am going to pull it out completely and see if there...

Guys, kinda what I figured too; however, there is s 24vdc Bogen power supply that was unhooked; I might try setting it on pr 24 and see if I get an audio linkup on 25; I am still trying to find the paging amp too; but having no audio at all on 25 scares me.

Folks, I have a CICS w/7.1 s/w want to use external paging and it worked on the old cabinet, which I replaced due to water damage. tried prs 24 & 25 the breakout on the AMP where the trunks reside; nothing sets are programmed for paging (Y) result: I can't get anything out of the cabinet by...

Thanks but there are 40 MBs and all are not being used; the user has initialized his MB; it is listed as "subscriber"; does the class of service matter please?

Folks, we have a BCM w/callpilot in our sheriff's department. The sheriff wants to be able to call & leave messages in a mailbox that has no extension number. I have tried to add an unassigned mailbox (307) with no extension number. I can't get it to work. What have I missed please?

I've heard alot about them lately; Actually read some comments online and they appear to be a group of former Nortel guys, who have taken the Norstar BCM platform and built their on compatiable box? Good? Bad? What do you think about them?

Thanks all....I was pretty sure it could not be done, but I have a county agency that has a MICS and wanted to make it IP compatible (BCM) as cheaply as possible. They just replaced their NAM with a CP150 in the spring due to lightning damage. Thanks again folks. P.S. Curlycord: I couldn't get...

Thanks all. Sorry, apparently I could not read anything on this forum yesterday. Kept telling me 0 replies.

Folks, can a stand-alone Callpilot be added to any of the BCM platforms by just using a digital port or do I need to have keycodes specifically for BCM please?

Folks, can a stand-alone Callpilot be added to any of the BCM line by just using a digital port or do I need to have keycodes specifically for BCM please?

Hey thanks Brian!!!!!Interesting tho I just turned the system down and brought it back up and I was able to change port 7 to a trunk module. You are a real asset to this forum! I know everyone appreciates all of the time you spend helping others out. Holiday Blesssings to ya! Brent

shows mod 7 as std and I can't change it.....

That's what I have as well and I have dt on the first pair (1) of the mod that I added in pos 7 slot one....which should be 085...go figure...the switch doesn't see it...

Ok Brian, so I have made the changes; how do the trunks number in slot 1 please? 001, 002, 003, etc? or 091, 092.....

Folks, I made the upgrade just fine and now I need to add station and trunk modules. I know I have to put all of the station mods on the existing 6 port fiber and the trunk mods on the new 6 port card. Questions please: 1: how do I rearrange them on each card please? 2: how will the trunk cards...