Search results for query: *

I have a BCM 450 that is giving the following Alarm ID: 30203 Severity: information Description: User logon to web interface User=xxxx Host=x.x.x.x Comp=WWW Resolution: No Action Required. I have noticed that when i loggon to BCM via browser i get the same alarm once. However this alarm is...

I have 2 sites one with a BCM 450 r5 (MCDN installed) with H323 trunks and a MICS 7.0 (no MCDN which i woudlnt think would be necessary)connected to a Nortel VoIP gateway. The systems are connected via TWT MPLS. I can make "Intercom" calls across the VoIP trunks both ways just fine. When i make...

I have several systems I can not open log files i have transfered to my computer. When I open them with an archiver they are staing they can not be opened and may require a password and prompt for one. THe systems i hvae seen so far do this are BCM50 r3 and r5, BCM 450 R5. I have not and any...

Packages are fine and there are 8 trunks of which i monitored and only 2 were used.

Have a strange one here. A BCM 450 with IP trunks (site A) and MICS with Nortel VOIP gateway (site B) and BCM 50 r3 with VOIP trunks (site c). We have the sites configured for direct intercom dialing across the VOIP trunks. IT all works fine except for this little issue. When site B intercoms...

Hi all. After letting the unit run all night it finally loaded. I could access via element mgr. I rebooted and did a shutdown a couple times and it booted in the normal time frame. It had to have something to do with the AUTOCOREUPLOAD failed that i saw. I didnt see again. It appears to be...

We just got a base BCM 4.0 (no keycodes or MBM's). I connected my laptop to the console port to monitor. Normally a BCM boots up in about 15-20 minutes. I have had this up for over 2 hours and it is still not up all the way allthough it is doing somthing as i can watch via hyperterminal. One...

I am having issuess with 1200 series IP sets volume not staying where it has been adjusted to especially with page volume. THe global setting is for sets. Digitals work fine. You can adjust the volume for that one call, page, handdsfree etcthen it goes back to what it was LOUD. The latest SU's...

For all those that read this and those that posted I found the issue. It was DNS on the clients network. DNS records were not updated with the BCM name (due static IP settings on the BCM) so the network had no idea how to get the read receipt back. What we were seeing was...

Bluemr2. Were you able to accomplish the meage forward with out installing the unified messaging client on the work stations?

Thanks for your input. At least i now know it does work with someone. There must be in a fix in one of the patch's because what we are seeing being sent back is mailer-daemon@bcmname.domain.local. The read receipt process does work from outlook to outlook. So the first thing is the patch's. I...

Has anyone setup the Message forwarding within the Mail box Manager to enable Voice mail to be forwarded to a Email address and have the MWI turn off and delete the Voice mail? We are using an exchange server and not installing the client on the users work station. No i have not installed the...

Yes thats whats happening. I sure would like it not to though.

Thanks. After working with my support team and testing with an MICS it appears that this is the default/proper action (even though i feel the programming should stay with the DN assigned). We tested the same scenario on the MICS and it does the same thing. If any one else knows any way to stop...

That may clear the MWI manually but it should delete the Vmail and clear the MWI automatically

I have setup unified messaging for Vmail to be forwarded to the users exchange server and set the action to delete upon opening the Email. Everything works (Vmail is forwarded to users exchange account and can be played) except that when sending the read or delivery receipt the MWI does not go...

I have recently replaced a MICS with a BCM 450 5.0. Anytime i make a DN change it changes line programming (prime set,control set etc) and the internal autodial button programming on extensions that had the origianl DN programmed. I have not experienced this behavior with MICS or BCM 400's or...

I have Terminal Server running on Server 2003 and about the middle of last week somthing happened that Users can no longer download anything from the internet (PDF, exe, zip etc) but administrators can. Enhanced security was not installed at the time this happened and i could find nothing in...

Does anyone know what softphone(if any)will work with Windows Mobile.

I have 2 Norstar VoIP gateways connected to 2 separate MICS systems that I have setup for intercom dialing between themselfs and a BCM50. Calls can be made between all 3 sites however when dialing frome the MICS thru the Norstar VoIP GW to the BCM all calls go to the prime set as configured in...