Search results for query: *

Hi OB - We finally got the handsets to work ! There were two issues. The primary issue was the AP's were not configured properly. The IT guy made a few changes in his configuration and that was the key. Only 4 handsets worked and they were version 5.6 . The remaining 8 handsets were 4.4 and...

Hi OB - Well I am still struggling. Ready to give up and find something else to use. I have a SIP guy trying himself and he is having trouble too. He asked if I know the firmware and hardware version of a spectralink 8440 that DOES work with the Panasonic TDE600 or TDE200 . Maybe the newer...

We set up a SIP extension on cell phone using Zoiper similar to xlite. The sip extension works fine. Communicates perfectly with the Panasonic TDE600. We know its not the Panasonic. We followed Spectralink techs instructions as well as spectralink step by step online instructions. Handsets...

Thanks - I 'll ask the IT guy about the subnets when I see him on Monday . Thanks

Did Simple Set-Up option using utility tool for Spectralink . Maybe more specific settings are required . Port 5060 is being used . Should it matter if there are two networks ? One for wi-fi and another for the PBX? Wifi is using --.--.21.65 and the panasonic uses --.--. 20.72 . Anyway...

Thanks .I think you mean the settings of the handset ?..I'll try 1062@pbxipaddress .I dont believe anything gets lost. WIFI settings look good . I'll also try a longer password Thanks

Hi OB - Any thoughts on this ? Using a a micro usb I connect the handset to my laptop . I set up ssid and connect. Using Spectralink tool I programmed the wifi first. Checked handset and was connected to the wifi getting a strong signal on handset . Then I provisioned the handset . So far so...

Not sure how that works. I did see the SSID of the spectra handset on my laptop via wi-fi. I tried to connect to it but it would not connect. How do I actually do the registration process of the 3rd party sip extension? Is it automatic ? I dont think I can do much more on the Panasonic TDE

I am not aware of any controller . It appears each of the 12 8440 handsets are connected directly thru wi-fi. The handsets were set up as DHCP with the previous setup and can be set up the same. The IT guy I am working with setup SSID and WPA2-PSK passphrase. We made sure Radio enabled 2.5 &...

Hi OB-no luck. I think the issue is with the spectralink side. The Panasonic sip extension side seems set up correctly. The Spectralink isnt seeing network.

Hi OB Happy New Year-So we have most of the TDE600 up and running. Now my attention is on the Spectralink phones. The outgoing IT guy said on the old Avaya the Spectra phones were using a virtual port and the IPs were DHCP for each handset. He didnt offer much more than that. Right now I seem...

Thanks - Do you mean the SIP extension and password that the Spectralink is using with the outgoing Avaya G700 ? Maybe I can get that from the current Avaya tech. This is a residential care facility that on January 1 transfers to new ownership. Phone system , routers and network switches are...

Too late . We are cutting over the Avaya to Panasonic on the 31st. TDE600 & 620 .About 150 analog phones and 40 500 series phones. My knowledge on the Spectralink and setting up SIP extensions is sketchy at best. Panasonic will help but understandably not offer support on the Spectralink...

Thank you! So if there are 12 handsets I will need 12 SIP extension licenses, sound right? I am currently only certified on the ns700. But even speaking with panasonic tech support they never gave me that option of using a tde620 cabinet for analog phones. Didnt realize this was possible...

Any advice or help appreciated on this. Our customer is changing their Avaya IP phone system over to a TDE600 . They currently have about a dozen Spectralink 8440 handsets with wi-fi around the building that is working perfectly. They have a large investment in the Spectralink phones and...

Hi - I no longer have an older backup. I did find out there actually is a limit of 2000 one touch dial numbers numbers total. However each phone has about 10 one touch flexible buttons and there is a total of about 60 phones. Im no where near that 2000 number . I cleared out any unused...

Hi OB - I tried it in batch mode or offline and it does the same thing . Just wont allow a one touch in flexible programming to be added . I seem to recall a similar issue years ago and it was a bad parameter in programming. But not sure it was same error message. Just very frustrating

Hello , I have spent hours trying to resolve this issue. Customer has a TDE200 with about 45 T7633's and 20 NT343's. We recently upgraded it from a TDA200 . IPCMPR is 8.0 and all the other cards cards are latest firmware. Maintenance console is 7.8 . All the existing programming was...

I have a customer with a TDA100 fully working and programmed . They need more card slots and I have an empty TDA200 cabinet . I am going to move all the cards & medium PS from the TDA100 into the TDA200 including MPR & SD card. WHen I turn on the TDA200 will the programming from the MPR/SD card...