Search results for query: *

Hi there have a look at this link it might help http://www.c21video.com/firewall.html

Hi Guys hoping some one can help with this. I have a customers IP Office 500 V4.1 installed the sip trunk licences and programmed all test ok for inbound calls but on out bound calls I get destination in compatible on the phone. I have attached captured sip header from the ITSP below, the...

Hi knbink, thanks for the info tried it as described, but found it was only sending two dialed digits to line, changed the route on site A to national from private and everything works fine. Thanks buddy appreciate the help!!!

the default user name is nnadmin and password is PlsChgMe!(well known so not gviving any secrets away and you should always change it for security anyway) if the password has been changed you will have to reset the system to get it back to default then reprogram.Or get it from your maintainer...

We are going to go open source as trixbox now supports unistim straight out the box and gateways are available for for didgital sets, shame really the nortel went bust as 100% better than the cr*p produced by avaya. For those who sing the avaya IP office company song, take a look at the...

Hi I am hoping some one can answer this for me as avaya are refusing to help! They know the answer but won't give it to me. I have one BCM50 and a BCM400 linked via h323 trunks through a VPN. I can call from one site to another internally with no problems, the BCM50 side currently has no PSTN...

Hi, what do you need to know about the Emanager? http://www.telephoneengineerbirkenhead.co.uk

Hi Matt the answer is quite simple if you have two sites linked together site A and site B. Site A has the primary clock source and site B draws it's clock source from site A. If the link fails and site B has no secondary clock source to fall bask on the you may get sync problems. Solution is at...

Hi the program is v large around 190mb so a bit large to email but if you still need it a might be able to help you out. http://www.telephoneengineerbirkenhead.co.uk

Hi I have had the same problem on argent offices & Ip Offices, what you have done with you programming is basically right. The porblem I think you have is due to the AA not releasing the call( supervised transfer ), sorry but I am having to make some assumptions here. Does the call follow the...