Search results for query: *

Take a look at the Sonicwall/Aventail E series SSL VPN. They can handle your load, offer great control, and don't need client software on the pc's.

Take a look at Sonicwall Pro series. They do all you have asked for, and offer a web based interface to configure. There are wizards or you can choose to do it yourself.

Check to make sure that the terminal and tty settings are both set the same, to either half or full duplex.

A sonicwall is much simpler to configure and will provide you with a host of features you might not otherwise have. Site to site VPN and a vpn client are features you want, plus you can optionally enable many others. All configuration is done via a staight forward browser based interface. Our...

It sounds like you need to have split tunneling enabled. This needs to be done at the remote side, in your case the UK when the Cisco hardware lives. Once this happens you then need to configure you client for split tunneling as well. Be aware that some sites reuse to enable split tunneling as...

You did not indicate if there is a firewall appliance involved that might have VPN capabilites. If not, it would seem that your best bet is to add a small inexpensive applicance that will allow you to make a VPN connection. Sonicwall makes one that would do the trick for under $500.

Heres a thought.... If the traffic is coming in on ISP#1 then the return via ISP#1 is not being permitted. Can you guarantee that only ISP#2 is being used for the incoming query? If not, you will have to handle both cases.

Has anyone successfully connected a d2d2t device to a p5 series with AIX 5.3? If so, what was the device, and what did you have to go through to get it to work. thanks...

You have to use the Sonicwall client, and the Sonicwall must be licensed and configured for the VPN connection.

Aventail SSL VPN EX-750 also a good choice, and requires nothing on client systems.

If you use "errpt" it should tell you the failing disk. Once you see the messate type "errpt -a -j(identifier)" and it will give you the details, and should report a SRN for calling IBM maintenance. Also, a message typically appears in root mail as well.

In order to permit access to a web server on the LAN you need to do ALL of the following steps before it will work. Server Address Objects 1. Create 'xxx Private' assigned to LAN Zone for Host xxx.xxx.xxx.xxx inside ip address 2. Reuse 'WAN Primary IP' address object assigned to WAN Zone...

Take a look at the command rmnfs. You can use this to change nfs so as not to start.

When you say serial port login are you referring to the use of the vty (native S1, S2) ports (2) on the back of the system, as opposed to a 2 or 8 port asynchronous card? If you are using a vty it has limited functionality and I believe it is not enabled for login by default. You need to use the...

Not software, but an Aventail SSL VPN will do this.

Have you considered Sonicwall? www.sonicwall.com A wide range of firewall products and pricing to meet most needs. Take a look at the TZ and PRO series. Our company is Sonicwall Medallion Partner. Give me a call if I can help. Carl, 973-227-8440 X111

How about something from the network side. Any chance your isp or local area network is taken down on Saturdays for maintenance or whatever? Try disconnecting the wan cable on the Sonicwall, then put it back after a minute, and see what happens. The Sonciwall should handle this, but as you point...

You could modify sendmail.cf to do the Trend lookup instead of the Exchange server. This way you will dump the spam before it is passed to along.

Take a look at glvm (geographical logical volume manager) from IBM. It is included with AIX 5.3, and since you already have HACMP, it it totally automated. It can be run with or without HACMP, but the recovery steps are manual without HACMP.

www.blackbox.com will make anything you want in the way of custom cables.