Search results for query: *

I need to forward all calls coming in on sip trnk to the spa8000 to a cell phone after hrs, how do I set up? ?

Sorry, should have explained that *72+phone number doesn't work, even though it is listed as a feature. There has to be a procedure or value that has to be changed in the spa8000. Asked question in the Nortel forum to see if any one has had the issue and solution.

Customer has switch to Spectrum Sip trnk using SPA8000, Customer needs to forward all lines evenings and weekends to cell phone. They did this before using carriers call fwd feature, now it has to be done using feature in SPA8000. (*72) Any info on how to set up would be greatly appreciated.

Installed 4DLM daughter board on unicard, 4DLM not recognized by system, have power to exts, they display sw version, 4DLM is known to be good. No led on unicard to show card installed, not seen by Installation Tool S/W.

I have a Mitel 5000 AX Controller with 6.0 SP2 .59 software, what revision of Admin Software do I need?

Thanks, I was transferring to ext instead of lvmsg. Everything is working.

I have a norstar CICS 6.1 s/w and a flash VM with 2.0.10. Ext range of CICS is 200-215, I have assigned guest mailboxes 302 to 306. When a call is answered by the AA, the CCR tree will not transfer to guest mailboxes. Says person not available and plays recording for the path again. If call...

I have a Merlin Magix (upgraded from Legend), last 4 slots configured as follows. slot 14 is 016 TR slot 15 is 016 TR slot 16 T1 Card slot 17 008 opt The cards in slots 14 and 15 are bad, I want to replace slot 14 with a good 016 TR and put a 024 TDL in slot 15. When I do a board renumber...