Thank you for the help, I was just assisting with another company changing out the definity system. Was just needing info but we figured it by trial an error on the cisco switch.
PRI, trying to figure out how many digits carrier is sending and how many sending to carrier.
display trunk-group 10 page 2
Incoming calling number - Delete: Insert: Format
Is the line I think I am supposed to be looking at and it show nothing
display inc-callhandling-trmt...
Have had this issue before but lost the notes on how to turn it off. You can lock out trunk groups with the console and has happened at one of my locations. The light above the top left button shouldn't be lite red. Anyone know the key sequence to turn it off...
Had an IP phone working at a remote location. Some changes to the network were made at the remote location. The phone will not register now. When I connect it at main location it works correctly. Any ideas?
Inherited this system to maintain couple years ago, been able to figure most things out.
I have never accessed the media gateway or programmed anything at the main location to be directed to it. Have a big extension move coming up that I will be moving extensions from main location to the...
Ok curly and hawks, sorry for the back and forth. Been trying to fix this one inbetween service calls.
It was the hunt group line 168 was in group 1. So that fixed the problem of the target number going to that DN.
Now trying to get the system to recognize the ATA2 keeps coming up with...
Ok curly first of thanks for the help
All the above is set correctly
This is a new PRI install from standard CO lines, all CO's went to AA except for fax lines that were wired direct to them.
So I tried to send a target number to a standard digital station and it rings 1 time and goes to AA.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.