Search results for query: *

I have a cluster with 5 nodes all using the same PNI digits. The cluster is SDS enabled on version 4.2. I need to remove the PNI digits. Will this just be a case of removing the digits from each element or just from one element and SDS will synch the other controllers ? The problem I have is...

Many thanks KWB

I need to change a Network Element Name in a 4.2 SDS cluster. Is this just as straight forward as change name and SDS will change the other network elements. No applications on the network. Thanks

Anybody ever configure a DPNSS pipe to 02 mobile ? Cant seem to find what setting are required. Ive managed to get the channels idle but cant dial out. What are the circuit/link descriptor settings ment to look like ?

Got a 3300 running on version 8.0.8.8. I seem to be losing voice packets and the 3300 is generating the following logs quite often : No message marker found in first 160 bytes; probable message loss. Does anybody know what this means ?

You need to check that the sip provider is responding to the are u there messages sent out by the 3300 and that they are being recieved on the correct port. If not you need to make sure firstly the sip provider is sending them and then look at the firewall to make sure its forwrding it to the...

Got a 3300 lx on version 8.0.8.8 with 1 sip trunk installed. The sip trunk actually works fine but there is a critical sip link alarm on the system. If a call is done through sip, it clears the alarm but comes back 3 minutes later. In other words, whenever the sip trunk isnt being used, there is...

Is there any difference between a reboot and a resource recovery reboot ?

I have a mitel 3300 on release 8.0.8.8 and it seems to have generated 3 stale tasks which is raising a major alarm. Can someone explain what a stale task actually is and how to get rid of it. A reboot doesnt fix the problem. I have been told that an upgrade will fix the problem but this isnt...

I have a 3300 which has had the licenses manually installed, is it possible to re-sync this controller to the amc ? perhaps upgrading the software level and then try to resync to amc.........will this work ?

Thanks for the reply Mitelmatt! How can this be done without tennanting ?

I have a single 3300 with 2 PRI's. I need to configure it in such a way that i have 2 businesses running off the same controller, with each business using its own PRI. But the customer would like that if one PRI curcuit should fail, that business should trip over and use the other business's PRI...

Could it be portfast that is causing this problem ?

I have 2 3300(cxi + lx) controllers linked via ip trunks. I am using two cisco 800 series routers for the link and two hp 2626 layer 3 switches to do the routing. Site A(lx) seems to be sending broadcast storms to site B(cxi). The hp switch port(on site B) which my cisco router is plugged into...

What release of software is the mitel 3300 on ?

Yep thats it 443! Thanks guys.

Anybody know what the default https port on a mitel 3300 is ? Would be great if i could be pointed to a list of all ports on the 3300

Hello Gentleman I have a bit of a problem which i cannot seem to find a way around, so i thought id give this a shot! I have two phones, a superset 4025 and a spectralink phone. Both of which are using the ACD silent monitor feature. I need for both of these phones to ring at the same time. If...

Im pretty new to q-master server which i now believe is called zeacom. I have the unfortunate task of fixing a fault whereby the main admin mailbox has a fault. My nec set display 6 messages and when i access the mailbox, it states, your voicemail box is full and hangs up the call. Does...

Ive tried that and still the same result, also tried, re-installing client server software, re-installing client server software on a different pc, re-installed java, re-installed internet explorer and all still give the same fault.