Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. dodeesos

    Verify esxi installation path?

    Thanks cabraun and Dave. However, I didnt find any esx installation so i guess its actually installed on sd card. I also see that that my first post is a bit wrong. We have this problem when the affected esx loses contact with our Fibre Channel SAN. Not when it loses contact with our IP SAN as...
  2. dodeesos

    Verify esxi installation path?

    We have a couple of esxi's in a cluster running from local sd cards. One of them behaves a bit strange when it loses contact with our ip-SAN. The affected esxi disconnects from the cluster, i can access it by running the vsphere client directly against but the status of the vm's is grayed out...
  3. dodeesos

    Feedback window grayed out?

    I solved it myself! :) It's been some 3 years sense the last time I used EMG. It seems that the "PBX Feedback" windows is on by default, however its minimized so one has to "restore down" the System Information window to see it. Im pretty sure it wasnt like this in earlier versions? Our...
  4. dodeesos

    Feedback window grayed out?

    Hello! Anyone who might know why "Feedback Window" under Windows is grayed out? And if so how to ungray it? Regards! // dodeesos
  5. dodeesos

    Kernel memory allocation failed ??

    Hi! Does anyone know the solution for the issue in the subject? We have done a restart of our fw, and now it wont start the firewall. cpstart give this errormessage in the subject when trying to load the policy. Any Ideas?
  6. dodeesos

    Drop active session?

    Hi! Lately we have had problem with our internet connection. Some of our office users have discovered Spotify.... I'm a big fan of Spotify my self but we need ensure bandwidth for more mission critical trafic during office hours. At the same time we provide a couple of youth clubs with internet...
  7. dodeesos

    Write right on single attribute in MS AD 2000?

    Hi! I am trying to figure out if its possible to give an user write rights to change a single attribute in our AD (2000) via LDAP (and only read on all other attributes)? We have a setup where our AD feeds our pbx-db with email addresses via LDAP. We would like to feed the AD with extension...
  8. dodeesos

    RFI problem, IBM Type 1 cabling?

    I havent called Tyco , however I've contacted the person who leed the project to install the network some 15 years ago. He has changed employer two times sence then, I was in high school at the time. :) He was able to get me in contact with a technican who might be able to help us. We will get...
  9. dodeesos

    RFI problem, IBM Type 1 cabling?

    The problem is the baluns" & "What happens if you disconnect for balun from the type 1 and leave the cat5 connected?" I have tested with two baluns connected directly (no type 1) to each other and I still get RFI. So you are right, the problem is the baluns. As it seems the network speed also...
  10. dodeesos

    RFI problem, IBM Type 1 cabling?

    The "troubleshooting" have been walkin around with a hand scanner (police radio scanner). The RFI sounds like a high pitch tone, so it is quite simple to hear it. When I disconnect all cat5e cables from their baluns the interference stops... I only picked 100 MHz because its a round figure and...
  11. dodeesos

    RFI problem, IBM Type 1 cabling?

    Hi! One of the networks I manage we have problems with RFI (radio interference). As it seems our network generates RFI around for example 100 Mhz. We dont have problems with the network traffic it self, but a nearby police station complains about interference in their cars when they pass our...
  12. dodeesos

    3550, prioritize traffic based on cos value?

    Hi! I need help on configuring an 3550(WS-C3550-24) to prioritize traffic based on cos value. Traffic with cos value 5 or higher should have precedence regardless of interface, vlan och port...
  13. dodeesos

    802.1p, 2940, 2950 and 3550.

    Ok! Thanks for all your help. Regards! // dodeesos
  14. dodeesos

    802.1p, 2940, 2950 and 3550.

    I have a followup question. When reading the documentation from our ISP it seems like we can choose 802.1p as discussed above or to use "IP Pres./DSCP", or both. Anyone who knows how to tag traffic with IP Pres/DSCP value in IOS. // dodeesos
  15. dodeesos

    802.1p, 2940, 2950 and 3550.

    Ok Thanks! // dodeesos
  16. dodeesos

    802.1p, 2940, 2950 and 3550.

    Hi Andy! Thanks for the fast reply. I'm kind of to this QoS-stuff so bare with me..:) I guess I'm most interested in the second alternative in your reply. Mainly because I figured it would be the easiest, and that I only have a 3550 on one side of the ISP network (we also need to tag the...
  17. dodeesos

    802.1p, 2940, 2950 and 3550.

    Hi! I have a question regarding Qos and 802.1p tagging. I have the following setup: Node A | (Access port) Cisco 2950 (SI) | (Trunk) Cisco 3550 (EI) | (Trunk) ISP Network | (Trunk) Cisco 29x0 | (Access port) Node B Our ISP provides Qos in their network. In order to take benefit of this...

Part and Inventory Search

Back
Top