Search results for query: *

I am able to statically assign the PC with the same IP address and it works. I am using vlans on my layer 2 switch and program the phone with the vlan id of my layer 2 switch

No, i am not able to ping the phone from the ICP because the phone shows that it is out of service.

I am using a Mitel MXe 3300 without the use of a DHCP server, I did input the information into the DHCP static form. However when I plug the phone into a layer two switch, the registration process stops with the following on the display. phone ip x.x.x.x. ICP x.x.x.x Please help me to...

Trying to program a 5340 IP phone with a static IP address. I input the parameters that are needed. However when I plug the phone into a layer two switch, the registration process stops with the following on the display. phone ip x.x.x.x. ICP x.x.x.x Please help me to understand why the...

Help, New to using extreme switches, I have the x450-e switch and would like to route between the two vlans I have created. Thanks, Kevin J.

Help new to using Extreme switches. How do you route traffic between to vlans so that I can ping each of the two vlans? Thanks, Kjsnow67

Sorry, I forgot to mention that I am adding a S8500 server with SES to the S8700. When the customer bought the system, both the two S8700 and the S8500 servers with the appropriate software was purchased together.

Please Help, I would like to add an SES to an existing S8700/G650 Gateway. Do I have to obtain a new authentication file and license for the SES or use the existing files that was used for the S8700. Thanks, Kevin J

I am having problems with several of my 46xx phones. I would like to use a network analzyer to monitor the traffic of these phones via my C363T ethernet switch. I have tried port mirroring to analyze the traffic of one the 46xx phones. However, I do not see any of the packets from the phone...

Help, new to the SIP world of IP. I am adding an SES to my S8700/G650 with Rls. 4.0. Do I load the Multivantage software into the SES or do I start with the SES software to start the configuration by using the services port of the SES S8500C. Thanks, Kjsnow67

Thank you Mitch for your help. However, when I do a save trans I receive the following error cannot find standby server? any ideas? Please help. Thanks,

I loaded the license and authentication files with sucess. Installed and configured the IPSI board statically. However I was not able to save my translations. In additon, when I try to add a cabinet I receive the message: can't add no license file. can't communicate with the IPSI or the...