Search results for query: *

Τhank you so much, you are the best...

Hi, Belevedere can you share the file with me too? support@merkouris.com.gr

Hi, try 20-03-03 if pstn from ''Quing dial'' to ''direct dial''

Hi, Yes this system work with pulse. You will definitely find on eBay parts. These cards at some point may have a problem with the ringer generator and the phoneσ in the microphone resulting in the whole device making a loud noise. In both cases the damage are easily repairable.

put in 21-15 in all extensions route 2. I think you will be okay.

a.22-02= DIL per trunk in Night Service mode. b.22-07= assign the destination extension per line in Night Service mode. c.set the forward and switch to Night mode. I think it will work.

Hi, set normal temporary on 22-02 the trunks. See when you call again if you have delay or no cid. In this case change 81-01-09 from 90ms to 103ms or more.

Hi, you have to make three Operation Mode on 12-02 and 22-05 as well.

Hi, You can create an incoming group to 22-04 and on 22-08 assign this new group to trunks as, no answer destination group. 22-01-04 set the forward time.

I don't know the Capacity of the system but I would try to activate the free license and restart.

You can use 22-14, and as 1st Queue Message(22-14-02) put an upload msg wav file. For that you will need, PZ-VM21 with CF card.

Hi, the BS-10 from the SV8100, is compatible with the SV9100 CPU. You need the hardware migration license from NEC and check for the number of system port lic.