Search results for query: *

Ok so both options require changes by the CO, not sure they provide this feature, will find out, thanks.

Incoming trunk calls to an extension are being forwarded out another trunk line to a cell phone using the No Answer/Busy feature. This works, however outside trunks are not being released by PBX resulting in two hung lines that need to be manually reset; these are copper trunks coming in through...

Trying to send SMDR data through a CP24 MP card via IP. This is a NEAX 2000 IPS with series 3400 software. Here is what I can do: connect to Matworx using IP on my LAN; send SMDR data via RS-232 (port 0 on MP card), ping the CPU on my LAN. So I connect my SMDR terminal to MP Card with TCP/IP and...

That fixed it.[thumbsup2]

LCD display on Dterm Series i displays last character from the right side as the first character on the left. Example: for year 2013 as last character on the screen the "3" will show up as first character on left side. This is on a IPS 2000 system.

Ok thanks for the clarification guys....

So are you saying a delay is normal for this type of transfer?

Trying to integrate AD-8 into a Neax IPS, using the "await answer" transfer method, experiencing delay between subscriber picking up call and voicemail recognizing that call has been answered, i.e, call keeps ringing - up to 4 seconds. Any suggestions?

Is there a simple way of allowing a certain trunk restriction group to dial outside from a list of numbers and denying any other out calls. This list would not necessarily have a specific pattern or area code. Thanks.

Note on original post ext.# 400 dials 400, i.e., dials its own number. Call Back does work when calling another station and receiving busy signal. In my situation I want to dial my own number, and when I get busy signal, hookflash, activate Call Back, and when I hang up line should ring...

Hi. Wondering if the 2000 IVS has capability to call back or ring back an originating extension number? i.e., ext.400 dials 400, get busy signal, hookflash, then dials call back code. This could be useful for troubleshooting analog lines, ringers, locate numbers. Or could another feature instead...

ctvi Am not aware of any built-in DAT capability for CP03. We are using 2DATA for 2 announce messages.

Thanks for the clarification Dr.VuDu and Mextera. Seems part of my problem was in understanging this relationship: (1) 8-RSTA Card uses 1 card slot/two circuits/2 E-numbers/8 registers

Another typo here I get above problem if I assign E203/E204 to LT15. why? should read E202/E203 should 8-rsta card function properly with only these 2 receivers assigned?

Interesting posts guys Correction on earlier comment: Tried installing 8rsta, but system would not support more than 2 simultaneous calls(internal) at a time Meant only two simultaneous station to station calls allowed due to no dt receivers available. This is my current LEN listup with...

Thanks for the reply Dr VuDu More details on my situation: Problem is the IVS will not always recognize or accept DTMF tones from callers. Played with different settings, such as cmd 452. Then read in Programming Manual that AA feature cannot use DTMF reciver on CP03. Tried installing 8rsta, but...

Could anybody help me with this problem? I'm a novice trying to setup automated attendant in a 2 PIM system that uses the CP03 CPU card. Will AA work with the CP03? Is the PN-8RSTA card required? If so what happens to the built in receiver (E200 at LEN 0124)? Thanks

Does the Neax 2000 IVS have call display capability between analog phones (station to station)? I know this feature is available for D-Terms. Thanks