Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. theohiopatriot

    Mitel 3300 Inbound DTMF

    We had a customer switch vendors recently and now when you dial a number that is ringing to a PRI the Esna Message Server is not hearing dial tone. The system in question had a number RCF'd to a number on the PRI. This number is speed called to a number on another node that rings into the...
  2. theohiopatriot

    Mitel CallerID and UCA Issue

    Have a customer that would like the CallerID Name to display on the top of a 5330 phone but the number to display on the Multicall key. Currently names shows on both. System is a vUCC System on MAS 5.1 vMCD 6.0 SP 2 Lines are SIP. Second question is a UCA question. Ver 6.0 SP1. Customer...
  3. theohiopatriot

    Mitel 5000 Network issue

    I am installing a small 5000 network (3 nodes) which I have done hundreds of times before. The is on Version 6.0 software. Two nodes, A&B are on private 10.x.x.x networks and the third node, C is on a public network. The two nodes on the private networks are working fine. The third node, C...
  4. theohiopatriot

    sys alarm #32 P6002 INSUF BAND

    The proper vocoder for internal calls should be G 7.11 but calls that traverse an Wan link should use G 7.29.
  5. theohiopatriot

    Recall from blind transfer out of Nupoint callflow

    One option may be to add 7007 as an alternate extension in MB 2221.
  6. theohiopatriot

    Sip aware firewalls as SIP Proxy

    I have used the Ingate firewall and there is considerable programming. The programming on the 3300 is the same.
  7. theohiopatriot

    Calls not being reported by Mitel Contact Center Management

    Is this CSM or CCM? Is it running on an MCD? Is this a single or cluster of MCD's?
  8. theohiopatriot

    Recall from blind transfer out of Nupoint callflow

    What is the extension of the ring group and the extension of the device with the mailbox.
  9. theohiopatriot

    Ring Group Caller ID

    The members of the ring group are analog sets so this does not help me, but thanks.
  10. theohiopatriot

    Ring Group Caller ID

    Thank you for the replies. The analog phones do show the prime for the ring group number. The sets also do show called ID when dialed directly is it possible if the clip mode is changed in the analog setup that this could change what is displayed when the ring group is dialed? Currently I...
  11. theohiopatriot

    Ring Group Caller ID

    I have a situation where we have a ring group programmed with a few analog extensions. Internal callers call this ring group that is answered by one of the analog phones. The desire is for the analog phone to receive caller ID when the phone rings so if needed they can locate where the call...
  12. theohiopatriot

    Nupoint & MWI Turning Off

    Yes you are correct. One element was changed and several were at default. Thanks for the quick answer.

Part and Inventory Search

Back
Top