Search results for query: *

Check your manual for a full list of ports but check these - they cause one way audio and no audio issues if not forwarded correctly UDP 20,000 to configured upper bound* (SRTP) Server ? Internet Server ? LAN Voice Communications. Allow incoming SRTP on UDP ports 20000 – configured upper...

I believe it is color*set

What issues were you seeing (as a matter of interest) - was it port blocking relaterd?

We had initially tried using a VPN from our main to sattelite office and had bad quality issues. Like mentioned abve, the teleworker handles jitter very well and for ease of use it can't be beaten. I believe to get the softphone working you'd need to get some SIP licences from Mitel to enable...

Have a look at http://www.gns3.net/ Could save you hard earned on routers

Have a look at Dynagen and GNS - http://www.gns3.net/ If you can lay your hands on Cisco IOS then that will take care of all your router needs without spending a small fortune!

No...I want to use RDP to run an app from my TS server - but the window size seems non configurable. Passing parameters etc doesn't appear to work :(

What email system do you use?

Try the settings in Tools --> Options --> Environment --> Default Actions Should be able to set how an attachment is displayed and Quickviewer options (don't have GW to hand to test atm :p)

As above, have a look at http://www.novell.com/communities/node/2928/accessing-groupwise-user-accounts Basically how it works is you associate the account with a 2nd user and access with that, then you can associate back to the original one - so you never need to change the users password to...

http://www.snapfiles.com/get/runasspc.html Good read too http://blogs.msdn.com/david.wang/archive/2005/11/09/HOWTO_Run_as_normal_user_on_Windows.aspx

From memory, not done this for a few years :p Work on a copy of the OFXXXARC directory Remove the NGWGUARD.* files, USER.DB, MSG.DB, INDEX directory, and NGWCHECK.DB Open GroupWise Client as the user, send yourself a message then open the archive File > Open Archive (creates NGWGUARD.DB...

I've used this in the past to access without resetting a password (if using LDAP) http://www.novell.com/communities/node/2928/accessing-groupwise-user-accounts If you can find room, restoring the whole PO is the easiest way.

It is relative....think how fast 3.11 would run on your rig if it could be installed....XP would be a dog compared to it. Vista has a lot of crap that runs that can be turned off to free up some resources, with 3Gb it should run ok....although i have seen it run differently on similarily specced...

Hi all Does anyone know if it is possible to pass parameters to a deframe RDP session (window size etc) with ZFD 4.01. Seems set at 640x480 - TID suggests no but no definate answer. ICA has config options but none for RDP in C1. I know it was definetaly added in later versions of Zen...

Give this a try....

Thanks for the replies - although I agree that 1 DHCP server is the way ahead I believe this is a Vista issue. It connects through the router we want DHCP from to reach the one that it does use - XP etc all work fine as the router responds quickest (as you'd expect) Have applied MS fixes for...

There must be a million ways (not literaly ;)) - http://ebcd.pcministry.com/ is one of them

What error does it generate?

Hi all Got another Vista wireless networking problem. Running Vista Business and connecting to a 3Com Officeconnect wireless router - this is set as a DHCP server with a pool of 5 addresses - MAC address filtering and WEP are enabled. We also have another DHCP server on the same subnet (not a...