Search results for query: *

Telcodog, Thanks for the feedback. F*1 and F*2 is pretty much the same concept as going to an extensions Nortel settings. F*1 inputs the extension alone and F*2 makes it a XXXB button, meaning autodial and no ring. I tried it and it gave me the same response as XXXR and XXXB. Thanks! ltcom

Atdjr123, 201r means the extension 201 and ringing. It's like an answer dn on an MICS or BCM. 201b means extension 201 and no ringing like an internal autodial. if you hover over the keys under nortel settings for a phone you can see your options. The ring group will not work. The admin is...

What kind of router do you have on both ends? I have had this issue with an older router on the user end. Double check the ports. RTP is your voice path so there may be a conflict. They can see each other over the 7000 port, so that's why it's able to call each other

Hello all. I need to add an answer DN for a user and need for it to work like an MICS/BCM. They currently have an MICS and are converting over to a UCX system. They currently have several phones that have an answer dn as well as an internal autodial of the same dn. They use the answer dn to...

You need to port forward RTP 10000 - 13999 UDP on your router as well as 7000 UDP.

Everybody who viewed this and didn't catch it gets and F, especially me!..(pie dripping off of face)..[bigears]...I took the units to the customer site and they still didn't work....long story short.....type=peer....that's all I've got to say..........my name is forrest...forrest gump!

UPdate....I got it to work on my demo within 10 minutes...the only twist to this is that I'm installing a 4 port and 8 port. I brought the 8 port to the office and got it to work on the demo and I also had a spare 4 port that I had taken with me, but didn't try it while on customer site since I...

Your right it does say that as #1. I printed the instructions and it was cn the previous page, but I still added it regardless, as well set the sip registrations to no. I have been able to get this to work on another ippbx and I have a ucx demo that I will try on today.

I have installed a 4 port Grandstrean fxo gateway programmed it according to the Emetrotel wiki and having issues getting it to work. The instructions seem simple enough so Is there a place where I can see the status on the UCX? I can ping the gateway from my laptop and from the CLI off of the...

We are trying to get an Asterisk/Digium G100 gateway to work with an Avaya Devinity R8. We have gotten the calls to process, but we can't get them to go to voice mail at the far end due to an acsii character inserted before the extension Basically we have the following: Avaya PBX T1...

That's what I was thinking that there were power issues. The system isn't grounded. We inherited this system here recently and I have asked about any power issues and they have had some in the past, but not lately. But they could be having some after hours who knows.. No patch panels, just 66...

Okay...got another hard drive with the same software on it and when it first came up the telephony was still the same...but then the BCM re-booted and wiped it out..Did a restore and noticed that it was getting an error that the software was a mis-match???? The voice mail, key codes restored...

EM version 50.16.0.0.....Had to abort because because the back up froze up. Tested hard drive on another BCM and it doesn't reboot. Looked through docs and have asked a few other techs of any problems aborting during a backup, so thanks for the input Doc, but had no choice! Also Docs post isn't...

Sorry for not posting back earlier...the console was replaced and problem solved...

I have a BCM 400 r4.0.2.03a and had to abort a back up today. (long story) Couldn't get back into BCM via EM so rebooted and now vmail doesn't come up nor can I get into the EM. Rebooted 2x reset cards etc and nothing. Can make and receive calls but no voice mail. I haven't connected to the...

O.K. after many hours of research I have found the correct place for this. it is under Bix block cabling for peripheral devices and I found it within the rls 13 mermail cd. I also found a better NTP 555-7071-210 that shows a diagram and gives a better description of the RSM break out cable. Thanks!

Does any one have this diagram. I have looked at old mermail cd's and I thought I found it when it told me to go to planning etc chapter 6 and 7 of the hospitality section and there was nothing in there. I'm having issues with the dreaded PMS at a customer site and I have read all of the post...

Moved to another card and still have the same issue. It will ring for a while and then just blink when a call comes in. I will swap the console to see if the problem follows and post back.

Thanks! GHTROUT... I will get it changed out and post back!

Well I looked at the post and it didn't mention a resolution so I will keep this open for suggestions.