Search results for query: *

We upgraded them to 11 in January

I like your way, easier, but I thought I needed to create a dummy user in a dummy Hunt Group to have Call Forward to Cell phone, then go to Hunt Group I want forwarded and put the dummy Hunt Group as the OOS Fallback, then create a button on the set to control Forwarding of Hunt Group. Thank you

Hunt Group is 2505 with x-2500 and x-2501 in it. I would like the User(x-2500) to control the forwarding(for HG 2505), if possible?

Scenario: Hunt group consists of 2 pnones, IP(x2500) and an Analog(x-2501), when someone calls HG-2505, x2500 and 2501 rings. They want to be able to control the forwarding from the IP phone, so when they walk away calls go to a Cell Phone. They come back to office(x-2500), take off forwarding...

I had to change it to 101v under Message Waiting Indication Type, and now lighting Thank you

I have an IP Office rls. 11 with an expansion unit. They have Teledex Diamond+ analog phones I have message indication type to “On” I can see the ext. in System Status change to “On”, just not lighting the lamp

Is there anyway in an HMS400 for Auto Attendant to transfer to an external #? ex.(800#, cell phone of MGR on Duty, etc.)? From what I am seeing is you can only transfer to the Admin extensions that actually have mailboxes. Thank you

Thank you StanleySteamer for the help. There wer no Room Status Changes over the weekend, so by turning off Time- Detect in the OP of the PBX resolved the issue. The ST-CI and ST-CT commands were rejected by the PMS so no room status changes were made from those.

Thank you StanleySteamer, I have detect off and I still sent status changes from x-7706 status changes to ST-CI and ST-CT from a -4436 ext? See file http://files.engineering.com/getfile.aspx?folder=1e686a0c-7ce5-4e58-9950-447a6fbe05f9&file=IMG_0276.JPG

Yes, I'm sure, its happening at all times 10pm, 4:30 am, 6am. I did turn off Time Detect (attachment) yesterday under the options and haven't seen any room changes (ST) come through. Don't know if that's the fix. Wait and...

Below, The PBX(MT) is asking the status(ST)of Room 1000, PMS(PT) acknowledges and Changes it in PMS, then it asks for status(ST)again of Cleared(CL) and PMS changes it to Cleared, Vacant Ready and this happened all in a span of 1 minute 15:21:28 to 15:22:32. Front Desk sees in Host that's it...

I have a client that I installed Desktop Messaging on her Windows 7 Outlook 2010 and when installing I received errors on Printing Spools. Continued with install and finished. Rebooted and logged into Outlook and there was CallPilot with her messages(tested and played messages and opened faxes)...

Yes, it is a clid issue. Build an new clid table for the #camp you want to show for your outgoing caller id. Then assign it to his dn space new clid #with you just built.

I have a Hotel customer that says that a room keeps getting bogus calls in the middle of the night and waking them up. Obviously there is no display on room phones, so is there a feature to call back the last missed call to see where it came from? Thanks

I figured it out, the display of the incoming call was # xxx-xxx-xxxx Pxxxx, P means special character of identifying digits received(conversion #). In the RDB I changed DEXT to NO on the IDC tree and only receive xxx-xxx-xxxx, without the "P" in front of the DN. It works now, voicemail must not...

I will post print outs, calls can be answered, just after 4the rings hits VM,but not mailbox, only default.

I have set up and IDC table for a customer and a call comes in(idc-2000 to x-6000) and rings the phone as P6000, but after 4 rings it doesn't go to voicemail, but to operator(default)? Ex. x-6000 is the extension and it is built in Voicemail. What does the "P" mean? and how do I get Voicemail...

I have retrieved phones in Element Manager. I synced in Subscriber Manager and have same amount of sets. I have all i1230 sets and when press corporate directory on phone, all names show up, but on most of them I press softkey for dial and I get "no number to dial". Some IP sets work. I went...

Trunk Group Busy Key activated on Console?

Try Ronco Communications they are a CALA Distributor www.ronco.net 888-84-RONCO