Search results for query: *

The address you put in the DHCP scope is not a register "to" address rather a register "via" address, so it can be normal to have a different IP address to the one specified in the scope depending on the CM administration.

You cannot put announcements onto an extension. Using a vector is the best way. If you only wanted a single announcement to play and dont have the ACD software enabled on your switch then you could put the extension in a hunt group and point the incoming call at the hunt group, then on the...

If you "change abb system" and set the "Priveledged" flag to yes then all users should be able to use the list regardless of whether their COR allows them to make the call.

If you use the abbreviated dialling option you will not be able to use the sets personal list as this will be restricted according to its own COR (only being able to call 911). The group,system or enhanced lists allow the priviledge flag to be set to override the end users call restriction...

When you initiate a call forward it is for the originators calls only, in this case 1000. If 1001 initiates a call forward it is for calls made directly to 1001 and not calls that have been forwarded to 1001. The scenario you list above is correct as a call made to 1000 that is forwarded to 1001...

I think the Phantom extensions are configured in the "console parameters" screen and are called common shared extensions. You need to input a "start number" and then a "count number" in the next field, so in your example above you would input 5901 count 4 to give you the 4 phantom extensions to...

There should be no problems at all in moving the TN771D, the board is hot swoppable and will not be damaged by this operation.

Yes TCP port 21874 is the only port that needs to be opened to allow a transalation update to an ESS server