Search results for query: *

I am trying to connect the Avay G350 T1 card to Adtran 550 T1 with no success. Doesn anyhone know to connect these two using ISDN. I tried different settings no success. Any help will be appreciated. Thanks

Thanks all for your help. I finally got the phones to register after I added ip-interface procr

Yes I did the serial # in CM. If I am raunning G350 as I pure gateway, do I still have S8300B running? Thanks

Thanks All, I am still having some issues getting G350 to register with CM6.2 and vis versa. I configured port 10/2 on G350 and made it pmi. I am able to telnet to it and I added CM 6.2 IP address to to gmc list. I am able to ping CM IP from Gateway. I logged into CM through ASA and added...

hello all I bought a used G350 with S8300B card from ebay and was able to install CM5. I was able to ssh using craft user ID. I also was able to install CM6 and system platform in VMWARE. I am trying to use this for a home lab to learn Avaya phone system and don't have any licensing for G350...

Woow finally I got telnet to work on Fa10/2 after doing an NVRAM Initialization. But my S8300B still has the alarm on and when I do show fault, It s saying H248 registration failure. When I run show license status, It comes back with no license found. is there some sort of temporary license to...

I finally received my G350 gateway. I had some challenges getting it to work. After trying multiple console cables, I stumbled on a post online showing how to convert Cisco to Avaya console cable. I was able to log in using the root user. however, when I do a show command, It doesn't display...

tlpeter thanks for your response. Then if i decide to use G350 as a gateway, I dont have to have S8300 installed.I can just use CM6.2 on VM and connect to the G350 gateway. Will that work? Thanks

Thanks all for your responses. I am still confused. If G350 is just a gateway that connects to trunks and pots and provide dsp for analog phones, why can't I install CM6.2 on VMWARE and 5 on G350? I don't understand how the two interact with each other? I would I appreciate it if someone could...

Hello, First of all, I apologize if this has been asked before. I confess that I don't know much about Avaya. I have played with Cisco CME a bit in the past. I come from a routing and switching environment mostly Cisco and Juniper. I am a big believer in learning by doing and trying to learn...

montyzummer I have set the station to 9640. Thanks

Thanks for your responses. I do not have a Gateway installed as I don't plan on making any outside calls for now. I just want to get familiar with the software and test calling from one station to another. I added a procr ip-interface pointing to my CM. I launched One-X again and it seems to...

I apologize if this has been answered before. I am new to Avaya and in the process of setting a lab environment to test Cm6.2 I I was ubale to install System Platform and CM6.2 and able to log in through SAT. I added a simple dialplan and a station, but I am unable to register one-x in CM. I...