It only works with partner R3 or higher you didn't state which version you have. I have never had a problem logging in with US Robotics local connection make sure you can do that first then move on to remote connection. Try putting your modem back to default settings remove it from you operating...
Below is a link to a user guide and some tips make sure you have a password in the ACS system. Us robotics modem should connect a 14.4 easy, maybe your connection or cable is dirty. I think the 776 is wrong try 76 did you assign an intercom extension see below...
The problem is that the hard drive has more than just an operating system. It has Joyce the voice and all kinds of other folders so a generic hard drive will not work because you would need all of the other stuff that was on it.
Bob
Here is a link to determining all versions Partner, Partner Plus, PartnerII, Partner ACS.
http://support.avaya.com/japple/css/japple?temp.documentID=126501&temp.productID=107600&temp.bucketID=108020&PAGE=Document
Also previous thread Thread668-1384014 shows what ACS R6 and R7 display after...
I've never programed one of the stand alone systems either maybe this manual will help:
http://support.avaya.com/edoc/docs/partmail/prm3piu1.pdf
Good luck,
Bob
Yes you can.Go to the link below download the manual I chose R2 because you didn't state which one you had, page 29 explains how.
http://support.avaya.com/japple/css/japple?temp.documentID=133770&temp.productID=107653&temp.releaseID=141771&temp.bucketID=159898&PAGE=Document
Good luck
Bob
I forgot to say it in my last reply but programming is the same as ACS just not as many features. The battery is easy after you open up the case. You'll need a real small screwdriver to pry the latches over, be careful they break easy, pry them in the direction of the arrows. If you know how to...
OOPS I just got deleted for posting a default password.
My apologies
Not all cards say large or small on them I have one that says "Voice Messaging PC Card" early release maybe?
You can find out the size by doing this:
Assign port 78 and 79 to hunt group 7 using #505
Dial intercom 777 0#...
Hi,
Does anyone know in PC Administration Software what is the difference between R6.0 api and R6.0? I have looked at both and can't see any, and just wanted to make sure I shouldn't be using one over the other.
Also this is an excellent forum
My equipment:
Slot 3 ACS R6 with remote access card...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.