Search results for query: *

Folks, We have a Siemens Realtis Switch with a QSIG card in it. We are talking to an Cisco MGCP gateway and into Calll manager. Calls to call manager extension complete sucessfully. Calls that traverse the Call manager to other legacy PBX's fail if the name is 10 digits or longer.

Folks, We have a Siemens Realtis Switch with a QSIG card in it. We are talking to an Cisco MGCP gateway and into Calll manager. Calls to call manager extension complete sucessfully. Calls that traverse the Call manager to other legacy PBX's fail if the name is 10 digits or longer.

Guys, activity reporter was working fine on r3 but since the upgrade to R5 (and and deinstall and reinstall of Activity Reporter (now version 1.2)) it fails with Error: 31 - Send a HTTPS request failed Extract from Log File below - have checked BCM is set correctly and all seems well. Any...

Not sure exactly what you are trying to do but we have a BCM50 R3 with 2 externsion modules. One is a PRI connecting to our Telco and the other is the Quad BRI module which is working in S-bus mode which give us internal ISDN BRI's which we use for ISDN dataconnections to banks etc but would...

Folks, is there any way I can avoid going to every phone and setting the speed duplex etc of the internal switch. I am aware I can leave these at Auto but I want to set them due to some performance issues to 100 full but I would rather not go round all 32 ip phones.

Folks, I know BCM50 R3 adds support for Vista but is anyone aware if the 64 bit version of Vista is supported?

Folks, I have a user who operates as an operator. When she is on a call and another call come in I would like a "quieter" ring to be ommitted from the phone so that the other in the office can do a pickup. The old Norstar systems did this. Can any of you tell me if the BCM50 can do this...

Does anyone know if R3 will support Vista for Callpilot Unified Messaging, CTI and personal call manager.

I just reboot the box periodically. Dont really know why it is happening. I am missing a few of the latest patches so maybe they would help. Dont know if the box can take more memory but will investigate with my supplier.

Folks, I have this error in my alarm log periodically. It looks like the box is running low on resources. I have never seen memory upgrades for the BCM50 on sale. What is the Maximum memory that the box can handle and is it readily available. Can I buy standard memory from crucial.com or...

Folks, is there a way I can see the last, say 10, numbers that have called a phone. The set is an i2004 and it is on a BCM50 R2. I know i can do it with a PC and LANCTE / Personal Call Manager but it is not clear if it can be done from just the handset.

Hi, I have run SBS on SATA - it was on WD Enterprise 10K drives and it worked fine. We did move to SCSI recently but it ran for 2 years without problem. We did also use a Apadtec SATA RAID card rather than an on board variety. I would not recommend the on board RAID as if you do have problems...

Why not set up your vlans and put an additional NIC in the management PC with the subnet and VLAN of the BCM. Another option is to get Microsoft Windows Server to Route. If you have say Small Business Server then you can put in multiple NICs and enable routing. then you can access the BCM...

sorry, dont agree. If both switch and phone are set to full then it should work. It is pretty much standard practice to set the switches locked to full duplex and do the same with connected devices.

Same problem on BCM50R1 with Netgear PoE L3 switch. Restarting phone can cure. My plan was to see if BCM50 R2 solved problem and if not look to a cisco switch. All my phones are set to 100 Full as are the PC's. Some of the PCs had realtek chipset which didn't perform well on Auto speed and...

I get this sometime also - rebooting the PC seems to clear it up for me.

Folks, if anyone has done the BCM50 Rls 1 to Rls 2 upgrade then they could help me out. My supplier is coming onsite to do the upgrade shortly and the company partners would like to know what the likely downtime is. Assuming the mappy pat can someone let me know how long the upgrade takes.

Folks, I have a BCM50 R1 (basic model) with 32 IP sets and a dozen digital/ATA. We have the PRI add on and the BRI add on, the later providing basically an internal s-bus for centralised fax from a fax server. We want to got R2 for KEMs but my question to you is if I was to replace our unit...

Also worth checking the following 1) chech what LAN switch is capable of providing e.g 100 Full Duplex. 2) Set phone to same value (not auto). Phone will do 100 full. 3) see if your IT will fix the port at 100 full also. 4) set your PC for same value. 5) Check for realtek ethernet...

Folks, I have requested the BCM R2 upgrade from our supplier. While I am keen to have the additional functionallity, especially the IP KEMs, I dont want a load of problems. My question to you is given the software has just gone GA should I wait. I dont have any history with the BCM so I dont...