Search results for query: *

how do I make analog line 1 when the second call into line one and the C/o hunts over to line 2 on busy go to line 1 VM box The C/o hunt is in-place to allow the second call to come in. Line 1 is 061 Line 2 hunt on busy is 064 Both analog lines on the internal chassis of the 50 Right now I...

Ditto...the readme file will tell you if a re-boot is required.

I always get these backwards but use SMNP and the alerting function. I use this in a similar environment for remote sites and it works very well. It should work on all releases and all versions all the way back to a 1.0 But it's not bad idea to upgrade and patch when applicable. Setup a...

I show NTKC1248 For the paper copy of the auth code. It could be the 49 is the digital copy? Looks like around 300$ for paper copy. Might verify with your vendor what works best for you.

You can purchase the internal analog key-code to allow you to use this feature. from the Telco C/o you must have caller ID added to the line requested. Remove the ATA and use the internal key-code it's alot cleaner and more reliable You can have up to 4 of them. Also you can use a GATM 4 or...

Ok BAck online now. It worked. Wierd. Never seen that before. Thanks!

Trying this now...

Have you tried changing to NTP instead of manual time and adding the box to the LAN? It should then force push out the NTP time to the telsets.

I have a 8 seat VM license I can get into call pilot setup my mailboxes but when I try to actually activate them over the telset or dial the number I do not get the VMbox. I have them all setup to go to Ext 600 after 4 rings and the display on the phone shows VM but I never reiceve the messages...

Correct. The key-codes will continue to be avaliable for sale to support existing system. The true EOL for the system where manufacture support is no longer avaliable is 2015. The 50's,&450's are about the most reliable system out their on the market today for cost effective digital systems...

R1 = router 1 R2 = router 2 SW1 = Switch 1 R1 souds like your DSL modem which is also a router. Typically has 1-4 ports on the back of the unit. All you need in your network is a Layer 2 12 port switch that feeds your customers, including yourself. The router will dish out DHCP to all your...

nope. The software is installed via multitude of image file Linuix partitions on the HDD of the system. The system board itself does not raid per say as your thinking of as a server would and no you can't pop in a new HDD and it will push out the image and re-stripe the drive as it would in a...

If your onsite you Can also just go into Element manager off the console port login via admin presuming it's not been changed and use Element manager to either keep the same IP or use a new one.

Go into your AA and ensure your schedule is not off. Also check time&date on your system. Sounds like a schedule issue possibly?

Ok, Avaya yes :) Anyrate I have it downloaded and installed. I thought using that evaluation version it would utilize the internal BCM50 IP enabled single license keycode that comes with the BCM50. It appears the 2050 does need a seperate license client key code of NTKC0229 The BCM does see...

I found that shortly after I posted. Thanks, It's odd though because I have done exactly this using the 1 license that comes with the BCM and downloaded the v4 client and I am still getting: SERVER:NO PORTS LEFT From my research it shows that the client is not seeing the license corectly from...

Nope...Sorry It won't work from experience!

I think I get it now. Even though the physical 1 license key code exists on the BCM it is designed for the physcial i series Voip phone. If you use the 2050 you need to purchase the software package. You can download the copy for trial 60 day w/o purchase directly from Avaya. But it is...

Using 4.02.0062 2050 ip softphone Their is 1 active license that comes with the BCM-50 I wounder now though if that only works with the iseries deskphones and a additional keycode is required for the actual softphone usage. What is strange though is Element manager does see the phone as...

Did they provide it to you as a EXE or a ZIP? If it's a ZIP try to use windows explorer to open the zip file. Then just copy & past the contents within the ZIP file to a new folder somewhere on your desktop or PC. That will automaticially copy the contents within the file instead of trying to...